Eddy current pulsed thermography for ballistic impact evaluation in basalt-carbon hybrid composite panels

被引：19

作者：

Zhang, Hai ^{[1
,2
,7
]}

Sfarra, Stefano ^{[3
,4
]}

Osman, Ahmad ^{[2
,5
]}

Sarasini, Fabrizio ^{[6
]}

Netzelmann, Udo ^{[2
]}

Perilli, Stefano ^{[3
]}

Ibarra-Castanedo, Clemente ^{[1
]}

Maldague, Xavier P. V. ^{[1
]}

机构：

[1] Univ Laval, Comp Vis & Syst Lab, Dept Elect & Comp Engn, Quebec City, PQ G1V 0A6, Canada

[2] Fraunhofer Inst Nondestruct Testing IZFP, Dept Inspect Components & Assemblies, D-66123 Saarbrucken, Germany

[3] Univ Aquila, Dept Ind & Informat Engn & Econ, I-67100 Laquila, Italy

[4] Tomsk Polytech Univ, Thermal Control Methods Lab, Tomsk 634050, Russia

[5] Univ Appl Sci Saarland, Htw Saar, D-66117 Saarbrucken, Germany

[6] Sapienza Univ Rome, Dept Chem Engn Mat Environm, I-00184 Rome, Italy

[7] Univ Toronto, Dept Mech & Ind Engn, Ctr Adv Diffus Wave Technol CADIFT, 5 Kings Coll Rd, Toronto, ON M5S 3G8, Canada

来源：

APPLIED OPTICS | 2018年 / 57卷 / 18期

基金：

加拿大自然科学与工程研究理事会;

关键词：

PRINCIPAL COMPONENT THERMOGRAPHY; LASER LINE THERMOGRAPHY; DROP-WEIGHT IMPACT; HEATING THERMOGRAPHY; PSEUDO-DUCTILITY; GLASS-FIBERS; INSPECTION; HYBRIDIZATION; BEHAVIOR; VOLUME;

D O I：

10.1364/AO.57.000D74

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

In this paper, eddy current pulsed thermography was used to evaluate ballistic impact damages in basalt-carbon hybrid fiber-reinforced polymer composite laminates for the first time, to our knowledge. In particular, different hybrid structures including intercalated stacking and sandwich-like sequences were used. Pulsed phase thermography, wavelet transform, principle component thermography, and partial least-squares thermography were used to process the thermographic data. Ultrasound C-scan testing and X-ray computed tomography were also performed for comparative purposes. Finite element analysis was used for validation. Finally, an analytical and comparative study was conducted based on signal-to-noise ratio analysis. (C) 2018 Optical Society of America

引用

页码：D74 / D81

页数：8

共 42 条

[1] Quality control and authentication of packaged integrated circuits using enhanced-spatial-resolution terahertz time-domain spectroscopy and imaging
Ahi, Kiarash
Shahbazmohamadi, Sina
Asadizanjani, Navid
[J]. OPTICS AND LASERS IN ENGINEERING, 2018, 104 : 274 - 284
[2] Mathematical Modeling of THz Point Spread Function and Simulation of THz Imaging Systems
Ahi, Kiarash
[J]. IEEE TRANSACTIONS ON TERAHERTZ SCIENCE AND TECHNOLOGY, 2017, 7 (06) : 747 - 754
[3] Review of GaN-based devices for terahertz operation
Ahi, Kiarash
[J]. OPTICAL ENGINEERING, 2017, 56 (09)
[4] [Anonymous], THESIS
[5] The effect of hybridization on the ballistic impact behavior of hybrid composite armors
Bandaru, Aswani Kumar
Vetiyatil, Lakshmi
Ahmad, Suhail
[J]. COMPOSITES PART B-ENGINEERING, 2015, 76 : 300 - 319
[6] Basic temperature correction of QWIP cameras in thermoelastic/plastic tests of composite materials
Boccardi, Simone
Carlomagno, Giovanni Maria
Meola, Carosena
[J]. APPLIED OPTICS, 2016, 55 (34) : D87 - D94
[7] Sensitivity advantage of swept source and Fourier domain optical coherence tomography
Choma, MA
Sarunic, MV
Yang, CH
Izatt, JA
[J]. OPTICS EXPRESS, 2003, 11 (18): : 2183 - 2189
[8] Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg
Czel, Gergely
Wisnom, M. R.
[J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 52 : 23 - 30
[9] Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison
Deak, Tamas
Czigany, Tibor
[J]. TEXTILE RESEARCH JOURNAL, 2009, 79 (07) : 645 - 651
[10] Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results
Fernandes, Henrique
Zhang, Hai
Figueiredo, Alisson
Ibarra-Castanedo, Clemente
Guimarares, Gilmar
Maldague, Xavier
[J]. APPLIED OPTICS, 2016, 55 (34) : D46 - D53

← 1 2 3 4 5 →