Oxidation Behavior of MoSi2-Coated TZM Alloys during Isothermal Exposure at High Temperatures

被引:17
作者
Choi, Kwangsu [1 ]
Kim, Young Joo [1 ]
Kim, Min Kyu [1 ]
Lee, Sangyeob [1 ]
Lee, Seong [2 ]
Park, Joon Sik [1 ]
机构
[1] Hanbat Natl Univ, Dept Mat Sci & Engn, Daejeon 34158, South Korea
[2] Agcy Def Dev, Yuseong POB 35-44, Daejeon 34186, South Korea
基金
新加坡国家研究基金会;
关键词
TZM alloys; pack cementation; oxidation; SI-B ALLOYS; MECHANICAL-PROPERTIES; PACK CEMENTATION; MO; DIFFUSION; COATINGS; MICROSTRUCTURE; AL;
D O I
10.3390/coatings8060218
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Coating properties and oxidation behaviors of Si pack cementation-coated TZM (Mo-0.5Ti-0.1Zr-0.02C) alloys were investigated in order to understand the stability of the coating layer at high temperatures up to 1350 degrees C in an ambient atmosphere. After the pack cementation coatings, MoSi2 and Mo5Si3 layers were formed. When MoSi2-coated TZM alloys were oxidized in air at high temperatures, the Si in the outer MoSi2 layer diffused and formed SiO2. Also, due to the diffusion of Si, the MoSi2 layer was transformed into a columnar shaped Mo5Si3 phase. During isothermal oxidation, the Mo5Si3 phase was formed both within the coated MoSi2 layer and between the MoSi2 and the substrate. The coating properties and the oxidation behavior of the Si pack-coated TZM alloys were discussed along with the identification of growth kinetics.
引用
收藏
页数:10
相关论文
共 23 条
[1]   Studies on the development of protective coating on TZM alloy and its subsequent characterization [J].
Chakraborty, S. P. ;
Banerjee, S. ;
Singh, Kulwant ;
Sharma, I. G. ;
Grover, A. K. ;
Suri, A. K. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) :240-247
[2]   Studies on the development of TZM alloy by aluminothermic coreduction process and formation of protective coating over the alloy by plasma spray technique [J].
Chakraborty, S. P. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (05) :623-630
[3]   Development of silicide coating over molybdenum based refractory alloy and its characterization [J].
Chakraborty, S. P. ;
Banerjee, S. ;
Sharma, I. G. ;
Suri, A. K. .
JOURNAL OF NUCLEAR MATERIALS, 2010, 403 (1-3) :152-159
[4]   The mechanical properties and fracture mechanisms of wrought low carbon arc cast (LCAC), molybdenum-0.5pct titanium-0.1pct zirconium (TZM), and oxide dispersion strengthened (ODS) molybdenum flat products [J].
Cockeram, BV .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2) :120-136
[5]  
Kirkaldy J.S., 1988, DIFFUSION CONDENSED, P361
[6]   Magnetron-sputtered oxidation protection coatings for Mo-Si-B alloys [J].
Lange, Annika ;
Braun, Reinhold .
CORROSION SCIENCE, 2014, 84 :74-84
[7]   In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM [J].
Majumdar, S. ;
Sharma, I. G. ;
Raveendra, S. ;
Samajdar, I. ;
Bhargava, P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 492 (1-2) :211-217
[8]   Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo-0.5Ti-0.1Zr-0.02C alloy [J].
Majumdar, S. ;
Sharma, I. G. .
INTERMETALLICS, 2011, 19 (04) :541-545
[9]   Microstructure and oxidation resistance of a plasma sprayed Mo-Si-B multiphase alloy coating [J].
Nomura, N ;
Suzuki, T ;
Yoshimi, K ;
Hanada, S .
INTERMETALLICS, 2003, 11 (07) :735-742
[10]   Surface protection effect of diffusion pack cementation process by Al-Si powders with chloride activator on magnesium and its alloys [J].
Park, Joon Sik ;
Kim, Jeong Min ;
Kim, Ha Young ;
Lee, Jae Seol ;
Oh, Ik Hyun ;
Kang, Chang Suck .
MATERIALS TRANSACTIONS, 2008, 49 (05) :1048-1051