Particle size effects on the slurry erosion of aluminium alloy (AA 6063)

被引：118

作者：

Desale, Girish R. ^{[2
]}

Gandhi, Bhupendra K. ^{[1
]}

Jain, S. C. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

[2] CSIR, Cent Salt & Marine Chem Res Inst, Design Drawing & Workshop Engn Dept, Bhavnagar 364002, Gujarat, India

来源：

WEAR | 2009年 / 266卷 / 11-12期

关键词：

Slurry erosion; AA; 6063; Particle size; Kinetic energy; Scanning electron microscope; WEAR; VELOCITY; PREDICTION; ENERGY; FLOW;

D O I：

10.1016/j.wear.2009.01.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The effect of particle size on erosion wear of aluminium alloy (AA 6063) has been investigated in a slurry pot tester. Eight different sized quartz particles with mean size varying between 37.5 and 655 mu m have been used. The wear specimens are rotated inside the pot at 3 m/s velocity with orientation angle of 30 degrees and 90 degrees in a sand-water mixture of 20% concentration (by weight). It is seen that the erosion wear increases with increase in mean particle size. Two distinct mechanisms are noticed for mean particle size above 200 mu m and below this size for the range of parameters under this investigation. It seems that a threshold kinetic energy of impacting particle may exist, which results in change in the wear rate at a particular particle size. The threshold kinetic energy for different operating conditions has been determined and its relation with the change in erosion mechanism is discussed. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：1066 / 1071

页数：6

共 25 条

[1] IMPACT ANGLE, PARTICLE ENERGY AND MASS-LOSS IN EROSION BY DILUTE SLURRIES [J].

CLARK, HM ;

WONG, KK .

WEAR, 1995, 186 (02) :454-464

[2] THE INFLUENCE OF THE FLOW FIELD IN SLURRY EROSION [J].

CLARK, HM .

WEAR, 1992, 152 (02) :223-240

[3] ON THE IMPACT RATE AND IMPACT ENERGY OF PARTICLES IN A SLURRY POT EROSION TESTER [J].

CLARK, HM .

WEAR, 1991, 147 (01) :165-183

[4] Particle velocity and size effects in laboratory slurry erosion measurements OR... do you know what your particles are doing? [J].

Clark, HM .

TRIBOLOGY INTERNATIONAL, 2002, 35 (10) :617-624

[5] A re-examination of the 'particle size effect' in slurry erosion [J].

Clark, HM ;

Hartwich, RB .

WEAR, 2001, 248 (1-2) :147-161

[6] SPECIMEN DIAMETER, IMPACT VELOCITY, EROSION RATE AND PARTICLE DENSITY IN A SLURRY POT EROSION TESTER [J].

CLARK, HM .

WEAR, 1993, 162 :669-678

[7]

DEBREE SEM, 1982, HYDROTRANSPORT, V8

[8] Improvement in the design of a pot tester to simulate erosion wear due to solid-liquid mixture [J].

Desale, GR ;

Gandhi, BK ;

Jain, SC .

WEAR, 2005, 259 (1-6) :196-202

[9]

DESALE GR, 2001, P 17 NAT CONV MECH E, P426

[10]

DESALE GR, 2005, P 2005 ASME WORLD TR

← 1 2 3 →