Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6

被引：27
作者：
Wan, Z. Y. [1 ]
Zhang, Z. [1 ]
Zhou, X. [1 ]
机构：
[1] Dalian Univ Technol, Fac Vehicle Engn & Mech, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017年 / 90卷 / 9-12期
基金：
中国国家自然科学基金;
关键词：
Friction stir welding; Coupled thermo-mechanical model; Material flow; Grain size; MECHANICAL-PROPERTIES; MATERIAL BEHAVIORS; TOOL; TEMPERATURE; SIMULATION; PARAMETERS; FLOW;
D O I：
10.1007/s00170-016-9632-y
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A thermo-mechanical re-meshing model of friction stir welding (FSW) process of AA6082-T6 is used with a point tracking method for the determination of the final locations of the particles. The relations between the field variables and the material flows in the FSW process are discussed. Then the grain sizes after recrystallization are calculated. The comparison with the numerical and the experimental results in published literatures shows the validity of the proposed model. Based on the Zener-Hollomon parameter, the effects of strain rate and temperature on recrystallization are further discussed.
引用
收藏
页码：3567 / 3574
页数：8
相关论文
共 50 条
[41]   Influence of Process Parameters on the Vertical Forces Generated during Friction Stir Welding of AA6082-T6 and on the Mechanical Properties of the Joints [J].
Forcellese, Archimede ;
Simoncini, Michela ;
Casalino, Giuseppe .
METALS, 2017, 7 (09)
[42]   Refill friction stir spot welding of AA6082-T6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behavior [J].
Silva, Bruno Hessel ;
Zepon, Guilherme ;
Bolfarini, Claudemiro ;
dos Santos, Jorge Fernandez .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773
[43]   Friction Stir Welding Tool Design and Their Effect on Welding of AA-6082 T6 [J].
Ullegaddi, Kalmeshwar ;
Murthy, Veeresh ;
Harsha, R. N. ;
Manjunatha .
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) :7962-7970
[44]   NUMERICAL SIMULATIONS FOR BOBBIN TOOL FRICTION STIR WELDING OF ALUMINUM 6082-T6 [J].
Hamilton, C. ;
Dymek, S. ;
Weglowska, A. ;
Pietras, A. .
ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (03) :1115-1123
[45]   Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651 [J].
N. M. Daniolos ;
D. I. Pantelis .
The International Journal of Advanced Manufacturing Technology, 2017, 88 :2497-2505
[46]   Friction stir spot welding of AA6082-T6: influence of the most relevant process parameters and comparison with classic mechanical fastening techniques [J].
Fratini, L. ;
Barcellona, A. ;
Buffa, G. ;
Palmeri, D. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (07) :1111-1118
[47]   Numerical Simulation for FSW Process at Welding Aluminium Alloy AA6082-T6 [J].
Sibalic, Nikola ;
Vukcevic, Milan .
METALS, 2019, 9 (07)
[48]   Optimization of Dissimilar Friction Stir Welding Process Parameters of AA5083-H111 and AA6082-T6 by CCD-RSM Technique [J].
Kumar, H. M. Anil ;
Raman, V. Venkata ;
Shanmughanathan, S. P. ;
John, Jacob ;
Iqbal, U. Mohammed .
ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, :49-60
[49]   Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing [J].
da Silva, J. ;
Costa, J. M. ;
Loureiro, A. ;
Ferreira, J. M. .
MATERIALS & DESIGN, 2013, 51 :315-322
[50]   Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness, and tensile performance of AA6082-T6 friction stir welds [J].
Karakizis, P. N. ;
Pantelis, D. I. ;
Fourlaris, G. ;
Tsakiridis, P. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12) :3823-3837
12345