A fractographic study exploring the relationship between the low cycle fatigue and metallurgical properties of laser metal wire deposited Ti-6Al-4V

Additive manufacturing (AM) has achieved large attention within the aerospace industry mainly because of the possibility to lower the material and the manufacturing cost. For titanium alloys several AM techniques are available today. In the present paper, the focus has been on laser metal wire-deposition of Ti-6Al-4V. Walls were built and low cycle fatigue specimens were cut out in two orientations with respect to the deposition direction. An extensive fractographic evaluation was carried out after testing and the results indicated anisotropic behaviour at low strain ranges. Defects such as pores and lack of fusion (LoF) were observed and related to the fatigue life and specimen orientation. The LoF defects are regarded to have the most detrimental influence on the fatigue life, whilst the effect of pores was not as straightforward. Noteworthy in present study is that one large LoF defect did not influence the fatigue life, which is explained by the prevalence of the LoF defect in relation to the loading direction. (C) 2016 Elsevier Ltd. All rights reserved.