High-temperature properties of liquid-phase-sintered α-SiC

被引:35
作者
Jensen, RP
Luecke, WE [1 ]
Padture, NP
Wiederhorn, SM
机构
[1] Natl Inst Stand & Technol, Div Ceram, Gaithersburg, MD 20899 USA
[2] Univ Connecticut, Inst Mat Sci, Dept Met & Mat Engn, Storrs, CT 06269 USA
[3] Natl Inst Stand & Technol, Mat Sci & Engn Lab, Gaithersburg, MD 20899 USA
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 282卷 / 1-2期
关键词
silicon carbide; dynamic fatigue; constant stress-rate testing; subcritical crack growth; oxidation;
D O I
10.1016/S0921-5093(99)00769-8
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
We have characterized the high-temperature subcritical crack growth and oxidation resistance of a liquid-phase-sintered (LPS) SIC with 20% volume fraction yttrium aluminum garnet (YAG) second phase. Constant stress-rate testing in air in the temperature range 1100-1300 degrees C yielded a crack growth exponent, n = 38.9 +/- 9.9 and an activation energy, Q(scg) = (380 +/- 237) kJ mol(-1). Oxidation followed parabolic kinetics in the temperature range 1100-1300 degrees C with an activation energy, Q(ox) = (246 +/- 33) kJ mol(-1). At 1350 degrees C reaction between the growing oxide layer and the YAG second phase produced a low-melting eutectic, resulting in accelerated oxidation. Below 1100 degrees C, oxidation rates were also anomalously high for reasons we do not understand. In the intermediate temperature range, both the oxidation and subcritical crack growth resistance compare favorably with other silicon carbides. Published by Elsevier Science S.A.
引用
收藏
页码:109 / 114
页数:6
相关论文
共 32 条
[1]  
*ASTM, 1997, 7097 PS ASTM
[2]  
*ASTM, 1997, C136997 ASTM
[3]  
*ASTM, 1997, C121198A ASTM
[4]  
BONDAR IA, 1964, IAN SSSR KH, V7, P1325
[5]  
BRAUE W, 1989, 3 INT S CER MAT COMP, P817
[6]   DYNAMIC FATIGUE OF GLASS [J].
CHARLES, RJ .
JOURNAL OF APPLIED PHYSICS, 1958, 29 (12) :1657-1662
[7]  
CHIA KY, 1991, CERAM ENG SCI P, V12, P1845
[8]   High-temperature slow crack growth of silicon carbide determined by constant-stress-rate and constant-stress testing [J].
Choi, SR ;
Salem, JA ;
Nemeth, NN .
JOURNAL OF MATERIALS SCIENCE, 1998, 33 (05) :1325-1332
[9]  
CORDREY L, 1990, CERAM TRANS, V7, P618
[10]   OXIDATION-KINETICS OF HOT-PRESSED AND SINTERED ALPHA-SIC [J].
COSTELLO, JA ;
TRESSLER, RE .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1981, 64 (06) :327-331