Simulation of particle flow in a bell-less type charging system of a blast furnace using the discrete element method

被引：64

作者：

Zhang, Jianliang ^{[1
]}

Qiu, Jiayong ^{[1
]}

Guo, Hongwei ^{[1
]}

Ren, Shan ^{[1
]}

Sun, Hui ^{[1
]}

Wang, Guangwei ^{[1
]}

Gao, Zhengkai ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China

来源：

PARTICUOLOGY | 2014年 / 16卷

关键词：

Discrete element method; Blast furnace; Bell-less charging system; Granular flow; Size segregation; BURDEN DISTRIBUTION; SINTERED ORE; SOLID FLOW; MODEL; DEM; SEGREGATION; BEHAVIOR; HOPPERS; CHUTE; ANGLE;

D O I：

10.1016/j.partic.2014.01.003

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A three-dimensional model was established by the discrete element method (DEM) to analyze the flow and segregation of particles in a charging process in detail. The simulation results of the burden falling trajectory obtained by the model were compared with the industrial charging measurements to validate the applicability of the model. The flow behavior of particles from the weighing hopper to the top layer of a blast furnace and the heaping behavior were analyzed using this model. A radial segregation index (RSI) was used to evaluate the extent of the size segregation in the charging process. In addition, the influence of the chute inclination angle on the size segregation and burden profile during the charging process was investigated. (C) 2014 Published by Elsevier B.V. on behalf of Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences.

引用

页码：167 / 177

页数：11

共 32 条

[21] Stress field and solid flow analysis of coke packed bed in blast furnace based on DEM
Nouchi, T
Sato, T
Sato, M
Takeda, K
Ariyama, T
[J]. ISIJ INTERNATIONAL, 2005, 45 (10) : 1426 - 1431
[22] Mathematical modeling of the burden distribution in the blast furnace shaft
Park, Jong-In
Jung, Hun-Je
Jo, Min-Kyu
Oh, Han-Sang
Han, Jeong-Whan
[J]. METALS AND MATERIALS INTERNATIONAL, 2011, 17 (03) : 485 - 496
[23] [邱家用 QIU Jiayong], 2011, [过程工程学报, The Chinese Journal of Process Engineering], V11, P368
[24] Mathematical model for predictive control of the bell-less top charging system of a blast furnace
Radhakrishnan, VR
Ram, KM
[J]. JOURNAL OF PROCESS CONTROL, 2001, 11 (05) : 565 - 586
[25] [王平 Wang Ping], 2003, [钢铁, Iron and Steel], V38, P8
[26] Wang Ping, 2006, Journal of Iron and Steel Research, V18, P5
[27] Yang T. J., 1991, IRON STEEL, V26, P10
[28] Theoretical calculation and validation of burden trajectory in bell-less top blast furnace
Yu, Y. W.
Bai, C. G.
Zhang, Z. R.
Wang, F.
Lv, D. G.
Pan, C.
[J]. IRONMAKING & STEELMAKING, 2009, 36 (07) : 505 - 508
[29] Experimental and DEM study of segregation of ternary size particles in a blast furnace top bunker model
Yu, Yaowei
Saxen, Henrik
[J]. CHEMICAL ENGINEERING SCIENCE, 2010, 65 (18) : 5237 - 5250
[30] An experimental and numerical study of the angle of repose of coarse spheres
Zhou, YC
Xu, BH
Yu, AB
Zulli, P
[J]. POWDER TECHNOLOGY, 2002, 125 (01) : 45 - 54

← 1 2 3 4 →