Combining thermal analysis with other techniques to monitor the decomposition of poly(m-phenylene isophthalamide)

被引：30

作者：

Villar-Rodil, S ^{[1
]}

Paredes, JI ^{[1
]}

Martínez-Alonso, A ^{[1
]}

Tascón, JMD ^{[1
]}

机构：

[1] CSIC, Inst Nacl Carbon, E-33080 Oviedo, Spain

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2002年 / 70卷 / 01期

关键词：

AFM; aramid fibres; DTA; Nomex; TG; thermal decomposition;

D O I：

10.1023/A:1020685029220

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The pyrolysis behaviour of Nomex, poly(m-phenylene isophthalamide) fibres under argon has been investigated up to a temperature of 1173 K with different methods to get direct information on the progressive changes taking place in the solid material and its carbon fibre residues. The main stages of the pyrolytic degradation of the fibres were determined by thermal analysis (TG and DTA) and their chemical and morphological evolution through the different steps was subsequently followed by Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) measurements, respectively, on samples treated to various temperatures.

引用

页码：37 / 43

页数：7

共 50 条

[31] Utilization of surface differences to improve dyeing properties of poly(m-phenylene isophthalamide) membranes
Shenshen Ouyang
Tao Wang
Longgang Zhong
Shunli Wang
Sheng Wang
Frontiers of Materials Science, 2018, 12 : 129 - 138
[32] The high flux poly (m-phenylene isophthalamide) nanofiltration membrane for dye purification and desalination
Huang, Jian
Zhang, Kaisong
DESALINATION, 2011, 282 : 19 - 26
[33] Fabrication of asymmetric poly(m-phenylene isophthalamide)nanofiltration membrane for chromium(VI) removal
Xiaojing Ren Changwei Zhao Songshan Du Tao Wang Zhaokun Luan Jun Wang Deyin Hou State Key Laboratory of Environmental Aquatic Chemistry Research Center for EcoEnvironmental Sciences Chinese Academy of Sciences Beijing China College of Chemical Engineering Xiangtan University Xiangtan China
Journal of Environmental Sciences, 2010, 22 (09) : 1335 - 1341
[34] Particulate poly (m-phenylene isophthalamide) aerogels by a dropwise wet-curing method
Chen, Weiwang
Sun, Yueyan
Yang, Jie
MATERIALS LETTERS, 2023, 340
[35] Preparation and Properties of Partially Dry-processed Poly (m-phenylene isophthalamide) Films
Son, Tae-Won
Kim, Jong-Hwan
Lee, Woo-seung
Park, Jae-hoon
Kang, Young-Sic
FIBERS AND POLYMERS, 2013, 14 (04) : 653 - 659
[36] MODIFICATION OF NYLON-6 WITH POLY (M-PHENYLENE ISOPHTHALAMIDE) VIA MDI AS A CHAIN EXTENDER
LIN, MF
SHU, YC
JOURNAL OF MATERIALS SCIENCE, 1993, 28 (18) : 4862 - 4867
[37] From Trans to Cis Conformation: Further Understanding the Surface Properties of Poly(m-phenylene isophthalamide)
Ouyang, Shenshen
Wang, Tao
Yu, Ye
Yang, Bin
Yao, Juming
Wang, Sheng
ACS OMEGA, 2017, 2 (01): : 290 - 298
[38] Elimination of toxic metal ion by means of poly m-phenylene (isophthalamide) ultra filtration membranes
Balakrishnan, J.
Pramila, J.
MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 2858 - 2862
[39] HEAT OF DISSOLUTION OF POLY(M-PHENYLENE ISOPHTHALAMIDE) OF DIFFERENT STRUCTURE IN AMIDE-SALT SOLVENTS
SOKOLOVA, DF
SOKOLOV, LB
GERASIMO.VD
VYSOKOMOLEKULYARNYE SOEDINENIYA SECTION B, 1972, 14 (08): : 580 - &
[40] Structure and Properties of Dope-Dyed Poly(m-phenylene isophthalamide) Fibers By Wet Spinning
Liu, Li-Qi
Chen, Lei
Hu, Zu-Ming
Yu, Jun-Rong
Jing-Zhu
ASIAN JOURNAL OF CHEMISTRY, 2013, 25 (07) : 3952 - 3956

← 1 2 3 4 5 →