Structure of martensite in sputter-deposited (Ni,Cu)-rich Ti-Ni-Cu thin films containing Ti(Ni,Cu)2 precipitates

被引：27
|
作者：
Meng, X. L. [1 ]
Sato, M. [1 ]
Ishida, A. [1 ]
机构：
[1] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
来源：
ACTA MATERIALIA | 2009年 / 57卷 / 05期
关键词：
Shape memory; Thin films; Transmission electron microscopy; Structure; Martensite; SHAPE-MEMORY BEHAVIOR; B2-B19-B19; TRANSFORMATION; TI50NI50-XCUX ALLOYS; CONTENT DEPENDENCE; MICROSTRUCTURE; DEFORMATION; TEMPERATURE;
D O I：
10.1016/j.actamat.2008.11.035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The martensite structure in sputter-deposited thin films of Ti48.6Ni35.9Cu15.5 was studied. The Ti(Ni,Cu)(2) phase precipitates during the annealing process. Fine Ti(Ni,Cu)(2) precipitates can be deformed by the shear deformation of martensitie transformation, but they obstruct the movement of the twin boundaries to some extent. Coarse Ti(Ni,Cu)(2) precipitates seriously impede the growth of martensite plates and lead to a rectangular-cell-like structure of martensite in the film annealed at 873 K. The resistance of Ti(Ni,Cu)(2) precipitates to the growth of the martensite plates enhances with the coarsening of Ti(Ni,Cu)(2) precipitates. which is one of the reasons for the decrease in the maximum recoverable strain with increasing annealing temperature. B19' martensite with (001) compound twinning is frequently observed near coarse Ti(Ni,Cu)(2) precipitates and grain boundaries in films annealed at 873 and 973 K. The local stress concentration should be responsible for the presence of B19' martensite. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1525 / 1535
页数：11
相关论文
共 50 条
  • [1] Structure of martensite in deformed Ti-Ni-Cu thin films
    Meng, X. L.
    Sato, M.
    Ishida, A.
    ACTA MATERIALIA, 2011, 59 (06) : 2535 - 2543
  • [2] Structure of martensite in Ti-rich Ti-Ni-Cu thin films annealed at different temperatures
    Meng, X. L.
    Sato, M.
    Ishida, A.
    ACTA MATERIALIA, 2008, 56 (14) : 3394 - 3402
  • [3] Sputter-deposited Ti-Ni-Cu shaped memory alloy thin films
    Ren, MH
    Wang, L
    Xu, D
    Cai, BC
    MATERIALS & DESIGN, 2000, 21 (06): : 583 - 586
  • [4] Internal structures and shape memory properties of sputter-deposited thin films of a Ti-Ni-Cu alloy
    Matsunaga, T
    Kajiwara, S
    Ogawa, K
    Kikuchi, T
    Miyazaki, S
    ACTA MATERIALIA, 2001, 49 (11) : 1921 - 1928
  • [5] Characteristics of Sputter-Deposited Ti-Ni-Cu Shape Memory Alloy Thin Films
    Baatarsuk, Munkhbayar
    Joo, Hyeon-Woo
    Bae, Joo-Hyeon
    Huh, Sun-Chul
    Cho, Gyu-Bong
    Nam, Tae-Hyun
    Noh, Jung-Pil
    SCIENCE OF ADVANCED MATERIALS, 2018, 10 (07) : 974 - 978
  • [6] Influence of Ti2Cu precipitates on B19 martensite structure in a Ti-rich Ti-Ni-Cu thin film
    Meng, X. L.
    Sato, M.
    Ishida, A.
    PHILOSOPHICAL MAGAZINE LETTERS, 2008, 88 (08) : 575 - 582
  • [7] Thermodynamic modeling of the recovery strains of sputter-deposited shape memory alloys Ti-Ni and Ti-Ni-Cu thin films
    Gabry, B
    Lexcellent, C
    No, VH
    Miyazaki, S
    THIN SOLID FILMS, 2000, 372 (1-2) : 118 - 133
  • [8] Martensite structure in Ti-Ni-Hf-Cu quaternary alloy ribbons containing (Ti,Hf)2Ni precipitates
    Meng, X. L.
    Cai, W.
    Fu, Y. D.
    Zhang, J. X.
    Zhao, L. C.
    ACTA MATERIALIA, 2010, 58 (10) : 3751 - 3763
  • [9] Structure of martensite in sputter-deposited Ti-Ni thin films containing Guinier-Preston zones
    Zhang, JX
    Sato, M
    Ishida, A
    ACTA MATERIALIA, 2001, 49 (15) : 3001 - 3010
  • [10] Effects of Cu on the microstructural and mechanical properties of sputter deposited Ni-Ti thin films
    Callisti, M.
    Tichelaar, F. D.
    Mellor, B. G.
    Polcar, T.
    SURFACE & COATINGS TECHNOLOGY, 2013, 237 : 261 - 268
12345