Fabrication of hollow silica spheres and their application in polyacrylate film forming agent

被引:27
作者
Bao, Yan [1 ,2 ]
Yang, Yongqiang [1 ,2 ]
Shi, Chunhua [1 ,2 ]
Ma, Jianzhong [1 ,2 ]
机构
[1] Shaanxi Univ Sci & Technol, Coll Resources & Environm, Xian 710021, Peoples R China
[2] Shaanxi Res Inst Agr Prod Proc Technol, Xian 710021, Peoples R China
基金
中国国家自然科学基金;
关键词
WATER-VAPOR PERMEABILITY; FREE-VOLUME; FACILE FABRICATION; SHELL; MICROSPHERES; NANOPARTICLES; MEMBRANES; PARTICLES; THICKNESS; DIAMETER;
D O I
10.1007/s10853-014-8530-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Polystyrene (PS)/silica core/shell spheres were fabricated using mono-dispersed PS as templates by hydrolysis and condensation of two different silica precursors. The PS cores of PS/silica core/shell spheres were dissolved subsequently in the tetrahydrofuran medium to form mono-dispersed hollow silica spheres. The structures and morphologies of hollow silica spheres were characterized by scanning electron microscopy and transmission electron microscopy. Then, polyacrylate/hollow silica composite film forming agents were prepared via physical blending of polyacrylate and two different hollow silica spheres, and the water vapor permeability of their films were compared. The results showed that the structure of hollow silica spheres were very typical and obvious. The silica shell was continuous and uniform using tetraethylorthosilicate as precursor, which was accumulated by many silica seeds with size of 10-20 nm, and the thickness of silica shell was about 16.7 nm. However, the hollow silica spheres using tetraethylorthosilicate and vinyl triethoxysilane as precursors had mesoporous structure in the shell. The introduction of hollow silica spheres could significantly improve the water vapor permeability of polyacrylate film. At last, a possible mechanism for the formation of hollow silica spheres was proposed and the process of water vapor through polyacrylate/hollow silica composite films was modeled.
引用
收藏
页码:8215 / 8225
页数:11
相关论文
共 46 条
[1]   Bio-template route for facile fabrication of Cd(OH)2@yeast hybrid microspheres and their subsequent conversion to mesoporous CdO hollow microspheres [J].
Bai, Bo ;
Guan, Weisheng ;
Li, Ziyan ;
Puma, Gianluca Li .
MATERIALS RESEARCH BULLETIN, 2011, 46 (01) :26-31
[2]  
[鲍艳 Bao Yan], 2014, [硅酸盐学报, Journal of the Chinese Ceramic Society], V42, P914
[3]   Fabrication of monodisperse hollow silica spheres and effect on water vapor permeability of polyacrylate membrane [J].
Bao, Yan ;
Yang, Yongqiang ;
Ma, Jianzhang .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2013, 407 :155-163
[4]   Research Progress of Hollow Structural Materials Prepared via Templating Method [J].
Bao Yan ;
Yang Yong-Qiang ;
Ma Jian-Zhong .
JOURNAL OF INORGANIC MATERIALS, 2013, 28 (05) :459-468
[5]   Reaction Regimes on the Synthesis of Hollow Particles by the Kirkendall Effect [J].
Cabot, Andreu ;
Ibanez, Maria ;
Guardia, Pablo ;
Alivisatos, A. Paul .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2009, 131 (32) :11326-+
[6]   Recent Advances in Applications and Performance of Inorganic Hollow Spheres in Devices [J].
Chen, Min ;
Ye, Chenyu ;
Zhou, Shuxue ;
Wu, Limin .
ADVANCED MATERIALS, 2013, 25 (37) :5343-5351
[7]   Relationship between free volume properties and structure of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) membranes via various crystallization conditions [J].
Cheng, Mei-Ling ;
Sun, Yi-Ming .
POLYMER, 2009, 50 (22) :5298-5307
[8]   Free volume and mass transport in polymer nanocomposites [J].
Choudalakis, G. ;
Gotsis, A. D. .
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE, 2012, 17 (03) :132-140
[9]   One-Pot Preparation of Hollow Silica Spheres by Using Thermosensitive Poly(N-isopropylacrylamide) as a Reversible Template [J].
Du, Binyang ;
Cao, Zheng ;
Li, Zhenbing ;
Mei, Aixiong ;
Zhang, Xinghong ;
Nie, Jingjing ;
Xu, Junting ;
Fan, Zhiqiang .
LANGMUIR, 2009, 25 (20) :12367-12373
[10]   A Self-Templated Etching Route to Surface-Rough Silica Nanoparticles for Superhydrophobic Coatings [J].
Du, Xin ;
He, Junhui .
ACS APPLIED MATERIALS & INTERFACES, 2011, 3 (04) :1269-1276