Axial splitting of composite columns with different cross sections

被引：12

作者：

Assaee, H. ^{[1
]}

Rouzegar, J. ^{[1
]}

Fakher, M. S. Saeedi ^{[1
]}

Niknejad, A. ^{[2
]}

机构：

[1] Shiraz Univ Technol, Dept Aerosp & Mech Engn, POB 71555-313, Shiraz, Iran

[2] Univ Yasuj, Dept Mech Engn, Fac Engn, POB 75914-353, Yasuj, Iran

来源：

THIN-WALLED STRUCTURES | 2016年 / 99卷

关键词：

Energy absorber; Different cross section; Composite column; Polygonal die; Axial compression; Splitting process; CIRCULAR METAL TUBES; ENERGY-ABSORPTION;

D O I：

10.1016/j.tws.2015.11.012

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The research investigates the axial splitting of E-glass/vinylester and E-glass/polyester composite columns with identical perimeters but different cross sections on polygonal aluminum dies, and the elimination of restrictions on the initial slit in the classical splitting process. A novel technique for the construction of mandrels using polystyrene foam is developed. Composite columns are produced by winding the fiber fabric layers around the mandrels using coarse and fine E-glass woven fibers. The deformation modes and energy absorption behavior of columns during the long stroke of the splitting process are compared. The effects of the initial slits, various cross sections, side lengths, number of fiber fabric layers, resin type, fiber fabric type and angle of polygon dies on the splitting and curling of the structures are investigated. The results of this study reveal that alternating cross sections of columns may affect deformation modes and energy absorption parameters. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：109 / 118

页数：10

共 50 条

[41] Theoretical and experimental study on empty and foam-filled columns with square and rectangular cross section under axial compression [J].

Abedi, Mohammad Mahdi ;

Niknejad, Abbas ;

Liaghat, Gholam Hossein ;

Nejad, Mohammad Zamani .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 65 (01) :134-146

[42] Axial crushing of circular multi-cell columns [J].

Zhang, Xiong ;

Zhang, Hui .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2014, 65 :110-125

[43] Axial compressed UHPC plate-concrete filled steel tubular composite short columns, Part I: Bearing capacity [J].

Wei, Jiangang ;

Xie, Zhitao ;

Zhang, Wei ;

Yang, Yan ;

Luo, Xia ;

Chen, Baochun .

STEEL AND COMPOSITE STRUCTURES, 2023, 47 (03) :405-421

[44] Axial crushing of perforated metal and composite-metal tubes [J].

Rouzegar, Jafar ;

Assaee, Hasan ;

Elahi, Seyed Mohammad ;

Asiaei, Hessam .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (07)

[45] Axial crashworthiness design of double-hat beams with various cross-sections [J].

Li, Qiqi ;

Wei, Zhi ;

Zhou, Liang ;

Wang, Zhen ;

Li, Wenzhe ;

Li, Eric ;

He, Zhicheng .

ENGINEERING STRUCTURES, 2023, 283

[46] Study on Crush Tube's Geometric Cross-sections and Topology for Axial Crashworthiness [J].

Reddy, T. J. ;

Narayanamurthy, V ;

Rao, Y. V. D. .

DEFENCE SCIENCE JOURNAL, 2020, 70 (03) :249-259

[47] Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load [J].

Dundar, Cengiz ;

Tokgoz, Serkan ;

Tanrikulu, A. Kamil ;

Baran, Tarik .

BUILDING AND ENVIRONMENT, 2008, 43 (06) :1109-1120

[48] Buckling Solution of Fixed-Free Anisotropic Laminated Composite Columns Under Axial Loading [J].

Al-Masri, Rund ;

Rasheed, Hayder A. ;

Alali, Bacim .

FIBERS, 2025, 13 (04)

[49] Concentric axial load test for composite columns using bolt-connected steel angles [J].

Kim, Hyeon-Jin ;

Hwang, Hyeon-Jong ;

Park, Hong-Gun ;

Kim, Dong-Kwan .

ENGINEERING STRUCTURES, 2020, 214

[50] Axial compressive properties of round bamboo-fiber reinforced phosphogypsum composite short columns [J].

Cui, Zhili ;

Jiao, Zhenhua ;

Tong, Wei ;

Li, Pan .

SCIENTIFIC REPORTS, 2024, 14 (01)

← 1 2 3 4 5 →