Performance evaluation of direct methanol fuel cells for portable applications

被引:94
作者
Rashidi, R. [1 ]
Dincer, I. [1 ]
Naterer, G. F. [1 ]
Berg, P. [2 ]
机构
[1] Univ Ontario, Fac Engn & Appl Sci, Inst Technol, Oshawa, ON L1H 7K4, Canada
[2] Univ Ontario, Fac Sci, Inst Technol, Oshawa, ON L1H 7K4, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
Direct methanol fuel cell (DMFC); Battery; Exergy; Sustainability; Cost analysis; Efficiency; DESIGN; EXERGY; FIELD;
D O I
10.1016/j.jpowsour.2008.11.044
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This study examines the feasibility of powering a range of portable devices with a direct methanol fuel cell (DMFC). The analysis includes a comparison between a Li-ion battery and DMFC to supply the power for a laptop, camcorder and a cell phone. A parametric study of the systems for an operational period of 4 years is performed. Under the assumptions made for both the Li-ion battery and DMFC system, the battery cost is lower than the DMFC during the first year of operation. However, by the end of 4 years of operational time, the DMFC system would cost less. The weight and cost comparisons show that the fuel cell system occupies less space than the battery to store a higher amount of energy. The weight of both systems is almost identical. Finally, the CO2 emissions can be decreased by a higher exergetic efficiency of the DMFC, which leads to improved sustainability. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:509 / 516
页数:8
相关论文
共 19 条
[1]  
[Anonymous], 1989, AVAILABILITY ANAL GU
[2]   Water-neutral micro direct-methanol fuel cell (DMFC) for portable applications [J].
Blum, A ;
Duvdevani, T ;
Philosoph, M ;
Rudoy, N ;
Peled, E .
JOURNAL OF POWER SOURCES, 2003, 117 (1-2) :22-25
[3]   Portable and military fuel cells [J].
Cowey, K ;
Green, KJ ;
Mepsted, GO ;
Reeve, R .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2004, 8 (05) :367-371
[4]  
DINCER I, 2007, NATO ADV STUDY I MIN
[5]   Fuel cells for portable applications [J].
Dyer, CK .
JOURNAL OF POWER SOURCES, 2002, 106 (1-2) :31-34
[6]   Design, assembly and operation of polymer electrolyte membrane fuel cell stacks to 1 kWe capacity [J].
Giddey, S ;
Ciacchi, FT ;
Badwal, SPS .
JOURNAL OF POWER SOURCES, 2004, 125 (02) :155-165
[7]  
Kotas TJ., 1995, The exergy method of thermal plant analysis
[8]   Materials and design development for bipolar/end plates in fuel cells [J].
Kumar, A ;
Reddy, RG .
JOURNAL OF POWER SOURCES, 2004, 129 (01) :62-67
[9]  
Larminie J., 2018, Fuel Cell Systems Explained
[10]   Design, fabrication, and testing of a near constant pressure fuel delivery system for miniature fuel cells [J].
Luharuka, R ;
Wu, CF ;
Hesketh, PJ .
SENSORS AND ACTUATORS A-PHYSICAL, 2004, 112 (2-3) :187-195