Controlled release of microencapsulated 2-n-octyl-4-isothiazolin-3-one from coatings: Effect of microscopic and macroscopic pores

被引:24
作者
Bergek, Jonatan [1 ]
Trojer, Markus Andersson [1 ,2 ]
Mok, Alberta [1 ,3 ]
Nordstierna, Lars [1 ]
机构
[1] Chalmers Univ Technol, Dept Chem & Biol Engn, S-41296 Gothenburg, Sweden
[2] Max Planck Inst Colloids & Interfaces, Dept Interfaces, Potsdam, Germany
[3] SP Tech Res Inst Sweden, SP Wood Technol, Boras, Sweden
基金
瑞典研究理事会;
关键词
Diffusion; OIT; Biocide leakage; Internal phase separation; Microencapsulation; Porosity; CHARGED MICROCAPSULES; PERFORMANCE; DIFFUSION; BIOCIDE;
D O I
10.1016/j.colsurfa.2014.02.057
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
To keep a painted facade protected from mold and algae, anti-growth agents are mixed in the coating. These biocides are small molecules with a high diffusivity inside the soft polymeric coating matrix resulting in a premature loss of protection. A promising improvement can be achieved by encapsulation of the biocide in micro-sized containers and thereby reducing the release rate from the coating. In this study, the biocide 2-n-octyl-4-isothiazolin-3-one (OIT) has been encapsulated by various formulation routes and the release has been studied with regard to different conditions. It was found that an exceptionally low interfacial tension between OIT and water practically prevents any formulation of core-shell particles. However, polymeric monoliths of OIT and poly(methyl methacrylate) could be formulated by the internal phase separation method. OIT release studies from these microspheres revealed formulation-dependent microscopic porosity where the chosen evaporation path of volatile solvent significantly alters the diffusion coefficient of the biocide in the microsphere. Dense microstructure with low diffusivity was given when the poly(methyl methacrylate) was provided time or heat for complete polymer relaxation. The microscopic porosity was evaluated within a framework of applied diffusion models to the experimental data. In an applied perspective, microspheres could offer a value for sustained release of OIT from coatings. In this work, we found a considerable decrease in release rate from dry-film coatings with encapsulated OIT compared to freely dispersed OIT. In addition, macroscopic porosity in the coating, i.e. the porosity in the binder material, was proven to be crucial for the diffusivity. It was shown that macroscopic porosity heavily depends on the drying time of the coating where longer drying times of several weeks gave a substantial decrease in macroscopic porosity and release rate of OIT. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:155 / 167
页数:13
相关论文
共 39 条
[11]   Chemical Release from Single PMMA Microparticles Monitored by CARS microscopy [J].
Enejder, Annika ;
Svedberg, Fredrik ;
Nordstierna, Lars ;
Nyden, Magnus .
MULTIPHOTON MICROSCOPY IN THE BIOMEDICAL SCIENCES XI, 2011, 7903
[12]  
Evans D.F., 1998, COLLOIDAL DOMAIN PHY
[13]   Mechanistic aspects of the release of levamisole hydrochloride from biodegradable polymers [J].
Gallagher, KM ;
Corrigan, OI .
JOURNAL OF CONTROLLED RELEASE, 2000, 69 (02) :261-272
[14]  
Good R.J., 1992, Modern Approaches to Wettability: Theory and Applications
[15]   Mechanical properties of melamine formaldehyde microcapsules for self-healing materials [J].
Hu, Jianfeng ;
Chen, Huan-Qin ;
Zhang, Zhibing .
MATERIALS CHEMISTRY AND PHYSICS, 2009, 118 (01) :63-70
[16]   On the importance and mechanisms of burst release in matrix-controlled drug delivery systems [J].
Huang, X ;
Brazel, CS .
JOURNAL OF CONTROLLED RELEASE, 2001, 73 (2-3) :121-136
[17]  
Kiil S., 2007, DAN KEMI, V88, P26
[18]   Drying of latex films and coatings: Reconsidering the fundamental mechanisms [J].
Kiil, Soren .
PROGRESS IN ORGANIC COATINGS, 2006, 57 (03) :236-250
[19]   Preparation of poly(methylmethacrylate) microcapsules with liquid cores [J].
Loxley, A ;
Vincent, B .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1998, 208 (01) :49-62
[20]  
MENDIBOURE B, 1991, PROG COLL POL SCI S, V84, P338