Hydromechanical modelling of pulse tests that measure fluid pressure and fracture normal displacement at the Coaraze Laboratory site, France

In situ fracture mechanical deformation and fluid flow interactions are investigated through a series of hydraulic pulse injection tests, using specialized borehole equipment that can simultaneously measure fluid pressure and fracture displacements. The tests were conducted in two horizontal boreholes spaced 1 m apart vertically and intersecting a near-vertical highly permeable fault located within a shallow fractured carbonate rock. The entire test cycle, both the initial pressure increase and subsequent pressure fall-off, was carefully monitored and used for the evaluation of the in situ hydromechanical behaviour. The field data were modelled using both distinct-element and finite-element modelling techniques, in two and three dimensions. Field test data were evaluated by plotting fracture normal displacement as a function of fluid pressure, measured at the same borehole. The curves for the normal displacement of the fracture as a function of fluid pressure showed hysteresis loops, in which the paths for loading (pressure increase) and unloading (pressure decrease) are different. By matching this behaviour, the fracture normal stiffness and an equivalent stiffness (Young's modulus) of the surrounding rock mass were back-calculated. Evaluation of the field tests by coupled numerical hydromechanical modelling showed that the pressure-increase path of the normal displacement-versus-pressure curve is highly dependent on the hydromechanical parameters of the tested fracture and the stiffness of the matrix near the injection point, whereas the pressure-decrease path is influenced by mechanical processes within a larger portion of the surrounding fractured rock. (c) 2006 Elsevier Ltd. All rights reserved.