A study of thermo-mechanical reliability of lead-free PTH solder joints

被引：7
|
作者：
Nguyen, Jennifer [1 ]
Geiger, David [1 ]
Rooney, Dan [1 ]
Shangguan, Dongkai [1 ]
机构：
[1] Flextronics Int, San Jose, CA USA
来源：
SOLDERING & SURFACE MOUNT TECHNOLOGY | 2009年 / 21卷 / 02期
关键词：
Lead; Soldering; Joining processes; Waves;
D O I：
10.1108/09540910910947462
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Purpose - The purpose of this paper is to consider PTH solder joint reliability, particularly on the PTH solder joints with partial hole-fill and without pin protrusion. Also, the impact of voiding on the solder joint reliability is discussed. Design/methodology/approach - Thermal cycling tests for samples of different hole-fill percentages and voiding were conducted, and cross-sections of the PTH solder joints were performed to evaluate the solder microstructure, intermetallic formation, via hole-fill, and the condition of the PTH metallization and PCB dielectric prior to thermal cycling and at different times during thermal cycling. Findings - Different failure mechanisms were observed for solder joints with and without pin protrusion. PTH components with pin protrusion had better through hole-fill and less voids than PTH components without pin protrusion. Originality/value - The paper discusses in detail the effect of hole-fill percentage and voiding on PTH solder joint reliability.
引用
收藏
页码：39 / 47
页数：9
相关论文
共 50 条
  • [41] A study of board level reliability test with bump structure of WLCSP lead-free solder joints
    Kao, Frank
    Tseng, Zhi Hao
    Ho, Chun Sheng
    Chen, Stan
    Lan, Chang-Yi
    Chien, Feng Lung
    2007 INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE, PROCEEDINGS OF TECHNICAL PAPERS, 2007, : 323 - +
  • [42] Reliability study of surface mount printed circuit board assemblies with lead-free solder joints
    Lo, Jeffery C. C.
    Jia, B. F.
    Liu, Z.
    Zhu, J.
    Lee, S. W. Ricky
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2008, 20 (02) : 30 - 38
  • [43] Reliability of lead-free solder joints in CSP device under thermal cycling
    Liang Zhang
    Lei Sun
    Yong-huan Guo
    Cheng-wen He
    Journal of Materials Science: Materials in Electronics, 2014, 25 : 1209 - 1213
  • [44] Reliability of lead-free solder joints in CSP device under thermal cycling
    Zhang, Liang
    Sun, Lei
    Guo, Yong-huan
    He, Cheng-wen
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2014, 25 (03) : 1209 - 1213
  • [45] Influence of PCBs Coatings Wettability on Lead-free SMT Solder Joints Reliability
    Sitek, J.
    Drozd, Z.
    Bukat, K.
    2008 31ST INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY: RELIABILITY AND LIFE-TIME PREDICTION, 2008, : 55 - +
  • [46] Impact of board and component metallizations on microstructure and reliability of lead-free solder joints
    Zbrzezny, A. R.
    Snugovsky, P.
    Perovic, D. D.
    MICROELECTRONICS RELIABILITY, 2007, 47 (12) : 2205 - 2214
  • [47] The creep properties of lead-free solder joints
    H. G Song
    J. W. Morris
    F. Hua
    JOM, 2002, 54 : 30 - 32
  • [48] Electromigration issues in lead-free solder joints
    Chih Chen
    S. W. Liang
    Journal of Materials Science: Materials in Electronics, 2007, 18 : 259 - 268
  • [49] Thermal cycling effect on the drop reliability of BGA lead-free solder joints
    Liu, Fang
    Zhou, Jiacheng
    Yan, Nu
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2017, 29 (04) : 199 - 202
  • [50] Fracture Behavior and Reliability of Low-Silver Lead-Free Solder Joints
    Sharma, Ved Prakash
    Datla, Naresh Varma
    JOURNAL OF ELECTRONIC PACKAGING, 2022, 144 (04)
12345