A study of thermo-mechanical reliability of lead-free PTH solder joints

被引：7
|
作者：
Nguyen, Jennifer [1 ]
Geiger, David [1 ]
Rooney, Dan [1 ]
Shangguan, Dongkai [1 ]
机构：
[1] Flextronics Int, San Jose, CA USA
来源：
SOLDERING & SURFACE MOUNT TECHNOLOGY | 2009年 / 21卷 / 02期
关键词：
Lead; Soldering; Joining processes; Waves;
D O I：
10.1108/09540910910947462
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Purpose - The purpose of this paper is to consider PTH solder joint reliability, particularly on the PTH solder joints with partial hole-fill and without pin protrusion. Also, the impact of voiding on the solder joint reliability is discussed. Design/methodology/approach - Thermal cycling tests for samples of different hole-fill percentages and voiding were conducted, and cross-sections of the PTH solder joints were performed to evaluate the solder microstructure, intermetallic formation, via hole-fill, and the condition of the PTH metallization and PCB dielectric prior to thermal cycling and at different times during thermal cycling. Findings - Different failure mechanisms were observed for solder joints with and without pin protrusion. PTH components with pin protrusion had better through hole-fill and less voids than PTH components without pin protrusion. Originality/value - The paper discusses in detail the effect of hole-fill percentage and voiding on PTH solder joint reliability.
引用
收藏
页码：39 / 47
页数：9
相关论文
共 50 条
  • [21] Mechanical Size Effects in Miniaturized Lead-Free Solder Joints
    Peter Zimprich
    Usman Saeed
    Agnieszka Betzwar-Kotas
    Brigitte Weiss
    Herbert Ipser
    Journal of Electronic Materials, 2008, 37 : 102 - 109
  • [22] Mechanical size effects in miniaturized lead-free solder joints
    Zimprich, Peter
    Saeed, Usman
    Betzwar-Kotas, Agnieszka
    Weiss, Brigitte
    Ipser, Herbert
    JOURNAL OF ELECTRONIC MATERIALS, 2008, 37 (01) : 102 - 109
  • [23] Studies of the mechanical and electrical properties of lead-free solder joints
    S. K. Kang
    W. K. Choi
    M. J. Yim
    D. Y. Shih
    Journal of Electronic Materials, 2002, 31 : 1292 - 1303
  • [24] Mechanical properties of lead-free solder joints - The size efffect
    Zimprich, Peter
    Saeed, Usman
    Weiss, Brigitte
    Ipser, Herbert
    TMS 2008 ANNUAL MEETING SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2008, : 625 - +
  • [25] Studies of the mechanical and electrical properties of lead-free solder joints
    Kang, SK
    Choi, WK
    Yim, MJ
    Shih, DY
    JOURNAL OF ELECTRONIC MATERIALS, 2002, 31 (11) : 1292 - 1303
  • [26] Modal analysis of board vibration during mechanical reliability tests of lead-free solder joints
    Matkowski, P.
    Brabandt, I.
    2012 4TH ELECTRONIC SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE (ESTC), 2012,
  • [27] Thermomigration in lead-free solder joints
    Abdulhamid, Mohd F.
    Li, Shidong
    Basaran, Cemal
    International Journal of Materials and Structural Integrity, 2008, 2 (1-2) : 11 - 34
  • [28] Thermo- mechanical challenges of reflowed lead-free solder joints in surface mount components: a review
    Lau, Chun Sean
    Khor, C. Y.
    Soares, D.
    Teixeira, J. C.
    Abdullah, M. Z.
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2016, 28 (02) : 41 - 62
  • [29] Thermal cycling reliability of lead-free chip resistor solder joints
    Suhling, JC
    Gale, HS
    Johnson, RW
    Islam, MN
    Shete, T
    Lall, P
    Bozack, MJ
    Evans, JL
    Seto, P
    Gupta, T
    Thompson, JR
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2004, 16 (02) : 77 - 87
  • [30] Effects of Board Design Variations on the Reliability of Lead-Free Solder Joints
    Ma, Hongtao
    Lee, Tae-Kyu
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2013, 3 (01): : 71 - 78
12345