Experimental research of drilling mud influence on mud motor mechanical rubber components

被引：4

作者：

Epikhin, A. V. ^{[1
]}

Ushakov, A. V. ^{[1
]}

Barztaikin, V. V. ^{[1
]}

Melnikov, V. V. ^{[1
]}

Ulyanova, O. S. ^{[2
]}

机构：

[1] Natl Res Tomsk Polytech Univ, Dept Well Drilling, Tomsk 634050, Russia

[2] Natl Res Tomsk Polytech Univ, Dept Foreign Languages Specialists Nat Resources, Tomsk 634050, Russia

来源：

XIX INTERNATIONAL SCIENTIFIC SYMPOSIUM IN HONOR OF ACADEMICIAN M.A. USOV PROBLEMS OF GEOLOGY AND SUBSURFACE DEVELOPMENT | 2015年 / 27卷

关键词：

D O I：

10.1088/1755-1315/27/1/012051

中图分类号：

P3 [地球物理学]; P59 [地球化学];

学科分类号：

0708 ; 070902 ;

摘要：

The paper describes the experimental research of drilling mud influence on engineering parameters of mud motor mechanical rubber components. It is believed to be urgent due to increase in using mud motors in oil and gas well construction now, and, consequently, the issue of increasing their exploitation is becoming current. The development test results of elastomer IRP-1226 dependent on the mud type (alkaline, hydrocarbon or salt-saturated ones) and the temperature are shown in the paper. It is proved that the type of drilling mud and the temperature in bottom-hole zone have an influence on wear of mud motors elastomers.

引用

页数：6

共 50 条

[1] Impact of hydrocarbon drilling mud on mud motor elastomers at different temperatures
Epikhin, A. V.
Melnikov, V. V.
Nechaeva, L. N.
Ulyanova, O. S.
XX INTERNATIONAL SCIENTIFIC SYMPOSIUM OF STUDENTS, POSTGRADUATES AND YOUNG SCIENTISTS ON PROBLEMS OF GEOLOGY AND SUBSURFACE DEVELOPMENT, 2016, 43
[2] Experimental Study on Mechanical Properties of the Solidified Soil from Drilling Waste Mud
Lyu X.
Liu J.
Gao S.
Meng Y.
Guo Z.
Cailiao Daobao/Materials Reports, 2024, 38 (07):
[3] EXPERIMENTAL-VERIFICATION OF A DRILLING MUD PLUME MODEL
DAVIS, LR
ALBRIGHT, S
MOHEBBI, B
HERRON, J
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1989, 2 (01) : 91 - 99
[4] Model Predictive Control for Mud Motor Operation in Directional Drilling
Zhao, Yiming
Zalluhoglu, Umut
Marck, Julien
Demirer, Nazli
Morari, Manfred
2019 AMERICAN CONTROL CONFERENCE (ACC), 2019, : 5197 - 5202
[5] Experimental Investigations of Assessment of Acute Toxicity of Drilling Mud
Mamyrbayev, Arstan
Bermagambetova, Saule
Baytenov, Kuanysh
Komekbay, Zhanat
Sakebayeva, Laura
Satybaldiyeva, Umit
Yerimbetova, Gulmira
Zhilisbayeva, Kulyash
TOXICS, 2024, 12 (10)
[6] Influence of Inlet Mud Temperature on Bottom Hole Mud Temperature During Horizontal Well Drilling
Zhang, Zheng
Yang, Shangqing
Wang, Guorong
Wang, Jingpeng
Lu, Jingsheng
Zhong, Lin
Peng, Geng
Pan, Ganghui
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (06):
[7] Research on waste drilling mud being used in grouting
Chen, Zhen-Guo
Xu, Run
Gao, Gang-Rong
Meitan Xuebao/Journal of the China Coal Society, 2011, 36 (01): : 49 - 53
[8] Influence of Primary Glyoxal on Properties of Tested Drilling Mud
Minaev, K.
Martynova, D.
Knyazev, A.
Zaharov, A.
Shenderova, I.
XVIII INTERNATIONAL SCIENTIFIC SYMPOSIUM IN HONOUR OF ACADEMICIAN M. A. USOV: PROBLEMS OF GEOLOGY AND SUBSURFACE DEVELOPMENT, 2014, 21
[9] Assessment of drilling mud design for the offshore oil research
Romagnoli, R
PROCEEDINGS OF THE SIXTH (1996) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL I, 1996, 1996, : 118 - 120
[10] RESEARCH OF THE SODIUM FORMATE INFLUENCE ON THERMOSTABILITY OF STARCH-CONTAINING CLAY DRILLING MUD
Konesev, Gennady, V
Akhaev, Rustam R.
Dikhtyar, Tatyana D.
Mamaeva, Oksana G.
Vyaznikovtsev, Sergey F.
BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2020, 331 (08): : 112 - 122

← 1 2 3 4 5 →