Characterization and functionalization by sol-gel route of SiC foams

被引：22

作者：

Mollicone, J. ^{[1
]}

Ansart, F. ^{[1
]}

Lenormand, P. ^{[1
]}

Duployer, B. ^{[1
]}

Tenailleau, C. ^{[1
]}

Vicente, J. ^{[2
]}

机构：

[1] C1RIMAT, UMR CNRS 5085, F-31062 Toulouse 9, France

[2] Univ Aix Marseille, Lab IUSTI, F-13453 Marseille 13, France

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2014年 / 34卷 / 15期

关键词：

SiC foam; Sol-gel processes; Impregnation; Oxide coatings; X-ray microtomography; FILMS; DEPOSITION;

D O I：

10.1016/j.jeurceramsoc.2014.05.030

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ceramic foam materials are commonly used for various applications, including catalyst supports or solar receivers. SiC foams are good candidates for the latter application as solar receivers. Its efficiency is directly related to the geometry, which can be evidenced by X-ray microtomography, and optical properties of the receiver. A promising route to add functionalities with homogenous and adhering oxide coatings onto complex SiC foams in a single step process is proposed. This oxide synthetic process is derived from the Pechini method. Foams are fully impregnated by precursor sols with a controlled viscosity making a thin and totally covering coating. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：3479 / 3487

页数：9

共 18 条

[1] Deposition of mesoporous activated powder alumina on SiC ceramic foam substrates by an in-situ hydrothermal technique
Amrousse, Rachid
Choklati, Abdelouahad
Lizoul, Brahim
Bachar, Ahmed
Follet-Houttemane, Claudine
Hori, Keiichi
[J]. POWDER TECHNOLOGY, 2013, 247 : 231 - 234
[2] High temperature oxidation protective chromium-based coatings prepared by IBAD and PACVD methods
Cerny, F.
Pitter, J.
Konvickova, S.
Jech, V.
[J]. SURFACE & COATINGS TECHNOLOGY, 2009, 203 (17-18) : 2566 - 2570
[3] Porous materials as open volumetric solar receivers: Experimental determination of thermophysical and heat transfer properties
Fend, T
Hoffschmidt, B
Pitz-Paal, R
Reutter, O
Rietbrock, P
[J]. ENERGY, 2004, 29 (5-6) : 823 - 833
[4] Synthesis of La2-xNiO4+δ oxides by polymeric route:: non-stoichoimetry control
Fontaine, ML
Laberty-Robert, C
Barnabé, A
Ansart, F
Tailhades, P
[J]. CERAMICS INTERNATIONAL, 2004, 30 (08) : 2087 - 2098
[5] Thick YSZ films prepared via a modified sol-gel route:: Thickness control (8-80 μm)
Gaudon, M.
Laberty-Robert, Ch.
Ansart, F.
Stevens, P.
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (15) : 3153 - 3160
[6] The combustion chemical vapor deposition of high temperature materials
Hampikian, JM
Carter, WB
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 267 (01): : 7 - 18
[7] Thermodynamic approach to the vaporization and growth phenomena of SiC ceramics. II. The SiC surface under oxidative conditions
Honstein, G.
Chatillon, C.
Baillet, F.
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (05) : 1137 - 1147
[8] Towards a more realistic modeling of solid foam: Use of the pentagonal dodecahedron geometry
Huu, Tri Truong
Lacroix, Maxime
Huu, Cuong Pham
Schweich, Daniel
Edouard, David
[J]. CHEMICAL ENGINEERING SCIENCE, 2009, 64 (24) : 5131 - 5142
[9] Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited
Inayat, Amer
Freund, Hannsjoerg
Zeiser, Thomas
Schwieger, Wilhelm
[J]. CHEMICAL ENGINEERING SCIENCE, 2011, 66 (06) : 1179 - 1188
[10] Preliminary study of the use of β-SiC foam as a photocatalytic support for water treatment
Kouame, N. A.
Robert, D.
Keller, V.
Keller, N.
Pham, C.
Nguyen, P.
[J]. CATALYSIS TODAY, 2011, 161 (01) : 3 - 7

← 1 2 →