Softening mechanism and microstructure evolution of as-extruded 7075 aluminum alloy during hot deformation

被引：127

作者：

Sun, Zhi-Chao ^{[1
]}

Zheng, Li-Shuang ^{[1
]}

Yang, He ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Dept Mat Sci & Engn, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China

来源：

MATERIALS CHARACTERIZATION | 2014年 / 90卷

基金：

中国国家自然科学基金;

关键词：

As-extruded 7075 aluminum alloy; Microstructure evolution; Dynamic recrystallization; Dynamic recovery; Softening; DYNAMIC RECRYSTALLIZATION; BEHAVIOR;

D O I：

10.1016/j.matchar.2014.01.019

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hot deformation behavior and microstructure evolution rule of as-extruded 7075 aluminum alloy have been investigated based on the thermal compression experiment and quantitative metallographic test. It was found that the dynamic recovery was the main softening mechanism, along with the dynamic recrystallization in the local area within the deformation temperature range of 300-450 degrees C and strain rate range of 0.01-10 s(-1). Deforming below 350 degrees C, only dynamic recovery occurred with a typical subgrain structure, above 350 degrees C, dynamic recrystallization happened in local area. The dynamic recrystallized grain size increased with the increase of temperature, and decreased as strain rate increasing, showing typical characteristics of continuous dynamic recrystallization. At a higher deformation temperature and a lower strain rate, geometric dynamic recrystallizetion occurred. A larger strain resulted in more dynamic recrystallization. The second phase particles in the alloy would hinder the slip of grain boundaries, while would promote continuous dynamic recrystallization. (c) 2014 Elsevier Inc. All rights reserved.

引用

页码：71 / 80

页数：10

共 20 条

[1] SUPERPLASTICITY AND GRAIN-BOUNDARY-CHARACTER-DISTRIBUTION IN OVERAGED AL-LI-CU-MG-ZR ALLOY [J].

AVRAMOVICCINGARA, G ;

AUST, KT ;

PEROVIC, DD ;

PALUMBO, G ;

MCQUEEN, HJ .

CANADIAN METALLURGICAL QUARTERLY, 1995, 34 (03) :265-273

[2] COMPARATIVE HOT WORKABILITY OF 7012-ALLOY AND 7075-ALLOY AFTER DIFFERENT PRETREATMENTS [J].

CERRI, E ;

EVANGELISTA, E ;

FORCELLESE, A ;

MCQUEEN, HJ .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 197 (02) :181-198

[3] Current issues in recrystallization: a review [J].

Doherty, RD ;

Hughes, DA ;

Humphreys, FJ ;

Jonas, JJ ;

Jensen, DJ ;

Kassner, ME ;

King, WE ;

McNelley, TR ;

McQueen, HJ ;

Rollett, AD .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 238 (02) :219-274

[4]

FAIVRE P, 1979, J MATER SCI, V14, P897

[5] An experimental study of the recrystallization mechanism during hot deformation of aluminium [J].

Gourdet, S ;

Montheillet, F .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2) :274-288

[6]

Hirsch J., 2008, AL ALLOYS PHYSICAL A, P1790

[7] Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery [J].

Hu, H. E. ;

Zhen, L. ;

Zhang, B. Y. ;

Yang, L. ;

Chen, J. Z. .

MATERIALS CHARACTERIZATION, 2008, 59 (09) :1185-1189

[8] Transient dynamic recrystallization in an aluminium alloy subjected to large reductions in strain rate [J].

Huang, Y ;

Humphreys, FJ .

ACTA MATERIALIA, 1997, 45 (11) :4491-4503

[9]

Humphrys FJ, 1955, RECRYSTALLIZATION RE

[10] Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy [J].

Li, D. H. ;

Yang, Y. ;

Xu, T. ;

Zheng, H. G. ;

Zhu, Q. S. ;

Zhang, Q. M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15) :3529-3535

← 1 2 →