Thermodynamic Analysis of Ejector as an Expansion Device on Split-type Air Conditioner Using R410A as Working Fluid

被引：1
|
作者：
Sumeru [1 ]
Nasution, Henry [2 ]
An, Farid Nasir [1 ]
机构：
[1] Univ Teknol Malaysia, Dept Thermodynam & Fluid Mech, Skudai 81310, Johor, Malaysia
[2] Univ Teknol Malaysia, Fac Mech Engn, Automot Dev Ctr, Skudai 801310, Malaysia
来源：
ADVANCES IN APPLIED MECHANICS AND MATERIALS | 2014年 / 493卷
关键词：
Ejector; R410A; expansion device; capillary tube; air conditioner; REFRIGERATION CYCLE; 2-PHASE EJECTOR; PERFORMANCE;
D O I：
10.4028/www.scientific.net/AMM.493.227
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Typically the split-type air conditioner uses a capillary tube as expansion device. To enhance the performance of the system, an ejector can be applied as expansion device to replace capillary tube. Based on the numerical modeling, the coefficient of performance (COP) of standard cycle using R410A as working fluid was slightly lower than that of R22. The use of an ejector as an expansion device on a split-type air conditioner using R410 increased the COP by 10.8%. Also, R410A has a lower total GWP impact compared with R22, which reduce negative impact on the environment.
引用
收藏
页码：227 / +
页数：2
相关论文
共 18 条
  • [1] Numerical Study of Ejector as an Expansion Device in Split-type Air Conditioner
    Sumeru, Kasni
    Nasution, Henry
    Ani, Farid Nasir
    ADVANCES IN THERMOFLUIDS, 2013, 388 : 101 - 105
  • [2] Numerical and experimental study of an ejector as an expansion device in split-type air conditioner for energy savings
    Sumeru, Kasni
    Sulaimon, Shodiya
    Nasution, Henry
    Anid, Farid Nasir
    ENERGY AND BUILDINGS, 2014, 79 : 98 - 105
  • [3] Numerical Analysis of Modified Ejector Cycle on Ejector as an Expansion Device on Residential Air Conditioner
    Sumeru
    Nasution, Henry
    Ani, Farid Nasir
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 261 - +
  • [4] Numerical Study of an Ejector as an Expansion Device in Split-type Air Conditioners for Energy Savings
    Sumeru, Kasni
    Sulaimon, Shodiya
    Ani, Farid Nasir
    Nasution, Henry
    JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 2013, 45 (02): : 179 - 192
  • [5] A Comprehensive Energetic and Exergetic Analysis of an Ejector Expansion Refrigeration Cycle Using R22 and R410A
    Al-Chlaihawi, Kadhim K. Idan
    Al-Farhany, Khaled
    INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 2021, 29 (02)
  • [6] Thermodynamic Analysis of Two-Phase Ejector as Expansion Device with Dual Evaporator Temperatures on Split Type Air Conditioning Systems
    Arsana, M. E.
    Kusuma, I. G. B. Wijaya
    Sucipta, M.
    Suamir, I. N.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH AND APPLICATION, 2019, 494
  • [7] Performance optimization of an R410A air-conditioner with a dual evaporator ejector cycle based on cooling seasonal performance factor
    Kim, Sunjae
    Jeon, Yongseok
    Chung, Hyun Joon
    Kim, Yongchan
    APPLIED THERMAL ENGINEERING, 2018, 131 : 988 - 997
  • [8] Performance of A R22 split-air-conditioner when retrofitted with ozone friendly refrigerants (R410A and R417A)
    Bolaji, Bukola Olalekan
    JOURNAL OF ENERGY IN SOUTHERN AFRICA, 2012, 23 (03) : 16 - 22
  • [9] Empirical Correlations for Sizing Adiabatic Capillary Tube using LPG as Refrigerant in Split-Type Air-conditioner
    Sulaimon, Shodiya
    Abdulaziz, Azhar
    Darus, Amer N.
    Henry, Nasution
    ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 99 - 104
  • [10] Thermohydraulic and condensing phase-change analysis within the indoor unit of a split-type air-conditioner
    Tsao, Chung-Chun
    Shih, Yang-Cheng
    Lin, Chun-Hsiung
    Chao, Ling-Yu
    Hu, Shih-Cheng
    CASE STUDIES IN THERMAL ENGINEERING, 2020, 21
12