Effect of environmental conditioning on pure mode I fracture behaviour of adhesively bonded joints

被引：21
|
作者：
Abdel-Monsef, S. [1 ,2 ]
Renart, J. [1 ,4 ]
Carreras, L. [3 ]
Maimi, P. [1 ]
Turon, A. [1 ]
机构：
[1] Univ Girona, Polytech Sch, AMADE, Campus Montilivi S-N, Girona 17003, Spain
[2] Zagazig Univ, Fac Engn, Struct Engn Dept, POB 44519, Zagazig, Sharkia, Egypt
[3] Aalborg Univ, Dept Mat & Prod, Fibigerstr 16, DK-9220 Aalborg, Denmark
[4] Generalitat Catalunya, Barcelona, Spain
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2020年 / 110卷
关键词：
DCB; Fracture; Bonded joints; Environmental effects; Ageing; ELASTIC-FOUNDATION; SHEAR-STRENGTH; TEMPERATURE; BEAM; DELAMINATION; MOISTURE; TOUGHNESS; ENERGIES;
D O I：
10.1016/j.tafmec.2020.102826
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The influence of different harsh environmental conditions on the fracture behaviour of secondary bonded adhesive joints is experimentally investigated using mode I DCB tests. Two types of adhesively bonded joints under wet-aged and non-aged conditions were tested at three temperatures: -55 degrees C, room temperature and 80 degrees C. The wet-aged specimens were exposed to accelerated ageing in an environmental chamber at 70 degrees C/85% RH for four years; meanwhile, the non-aged specimens were stored in the laboratory under controlled conditions at room temperature. It was observed that extremely long ageing time has a significant effect on the fracture response of the bonded joint, while the temperature increase is holding a slight impact. Freezing temperature leads to more brittle behaviour and a reduction in the fracture toughness.
引用
收藏
页数：11
相关论文
共 50 条
  • [41] Effect of humidity on the mechanical properties of adhesively bonded aluminium joints
    Costa, M.
    Viana, G.
    da Silva, L. F. M.
    Campilho, R. D. S. G.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2018, 232 (09) : 733 - 742
  • [42] On experimental methods to investigate the effect of layer thickness on the fracture behavior of adhesively bonded joints
    Marzi, Stephan
    Biel, Anders
    Stigh, Ulf
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2011, 31 (08) : 840 - 850
  • [43] Fracture analysis of an adhesively bonded sandwich beam under mode-I loading
    Huang, SJ
    Lin, YC
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (07) : 833 - 847
  • [44] J-integral analysis of the mixed-mode fracture behaviour of composite bonded joints
    Loureiro, F. J. C. F. B.
    Campilho, R. D. S. G.
    Rocha, R. J. B.
    JOURNAL OF ADHESION, 2020, 96 (1-4) : 321 - 344
  • [45] Mixed-mode fracture analysis of adhesively-bonded joints using the ATDCB test specimen
    Nunes, F. A. A.
    Campilho, R. D. S. G.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 85 : 58 - 68
  • [46] A Rate-Dependent Cohesive Zone Model for Adhesively Bonded Joints Loaded in Mode I
    Marzi, S.
    Hesebeck, O.
    Brede, M.
    Kleiner, F.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2009, 23 (06) : 881 - 898
  • [47] Investigation of mode III fracture behaviour in bonded pultruded GFRP composite joints
    Cricri, G.
    Perrella, M.
    COMPOSITES PART B-ENGINEERING, 2017, 112 : 176 - 184
  • [48] Comparison between a Cohesive Zone Model and a Continuum Damage Model in Predicting Mode-I Fracture Behavior of Adhesively Bonded Joints
    Tserpes, K. I.
    Koumpias, A. S.
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2012, 83 (02): : 169 - 181
  • [49] Applicability of VCCT in mode I loading of yielding adhesively bonded joints-a case study
    Jokinen, Jarno
    Wallin, Markus
    Saarela, Olli
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2015, 62 : 85 - 91
  • [50] Temperature Effect on the Shear Strength of Adhesively bonded Joints
    Osanai, Kenji R.
    Reis, Joao M. L.
    FUNCTIONAL AND STRUCTURAL MATERIALS II, 2013, 758 : 119 - +
12345