Influence of martensitic phase on microcrack propagation in a ferritic-martensitic steel

被引：0

作者：

Brueckner-Foit, Angelika ^{[1
]}

Pitz, Pascal ^{[1
]}

Zeismann, Frank ^{[1
]}

Zellmer, Lisa ^{[1
]}

机构：

[1] Univ Kassel, Inst Mat Engn, D-34109 Kassel, Germany

来源：

11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2 | 2014年 / 891-892卷

关键词：

Microcrack; crack opening displacement; dual phase steel; X-ray tomography; digital image correlation; FATIGUE-CRACK-PROPAGATION; TOMOGRAPHY TECHNIQUE; MECHANICS;

D O I：

10.4028/www.scientific.net/AMR.891-892.301

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Hard phases such as martensite regions affect micro-crack extension by blocking the plastic zone ahead of the crack tip, but also by changing the crack opening which can be taken as loading quantity for cracks. This paper deals with the measurement of crack opening for microcracks in a ferrite/martensite dual phase steel. The methods used are in-situ testing in the SEM, X-ray tomography, and digital image correlation. It was found that martensite regions affect the relative displacement of the crack phases both at the crack tip and in the crack wake.

引用

页码：301 / 306

页数：6

共 50 条

[1] Microstructural influence on small fatigue cracks in a ferritic-martensitic steel
Motoyashiki, Y.
Brueckner-Foit, A.
Sugeta, A.
ENGINEERING FRACTURE MECHANICS, 2008, 75 (3-4) : 768 - 778
[2] Comparison of Work Hardening Behaviour of Ferritic-Bainitic and Ferritic-Martensitic Dual Phase Steels
Karimi, M. M.
Kheirandish, Sh.
STEEL RESEARCH INTERNATIONAL, 2009, 80 (02) : 160 - 164
[3] Investigation of Strain Heterogeneities Between Grains in Ferritic and Ferritic-Martensitic Steels
Marteau, J.
Haddadi, H.
Bouvier, S.
EXPERIMENTAL MECHANICS, 2013, 53 (03) : 427 - 439
[4] Fracture toughness assessment of ferritic-martensitic steel in liquid lead-bismuth eutectic
Van den Bosch, J.
Coen, G.
Almazouzi, A.
Degrieck, J.
JOURNAL OF NUCLEAR MATERIALS, 2009, 385 (02) : 250 - 257
[5] The Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of Ferritic-Martensitic Two-Phase Steels
Wolf, Lars Oliver
Nuernberger, Florian
Rodman, Dmytro
Maier, Hans Juergen
STEEL RESEARCH INTERNATIONAL, 2017, 88 (02) : 271 - 280
[6] Effect of Intercritical Temperature on the Microstructure and Mechanical Properties of a Ferritic-Martensitic Dual-Phase Low-Alloy Steel with Varying Nickel Content
Rodoni, Esteban
Verbeken, Kim
Depover, Tom
Iannuzzi, Mariano
MATERIALS, 2022, 15 (24)
[7] Influence of heat treatment on the fracture toughness and crack propagation in 5% Cr martensitic steel
Souki, I.
Delagnes, D.
Lours, P.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
[8] Hot-deformation characteristics of Al-alloyed δ-ferritic and martensitic dual-phase steel
Xu, Xiangyu
Yan, Zepeng
Niu, Zhenzhen
Shang, Xueliang
Wang, Xuemin
Shang, Chengjia
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 675 - 688
[9] Tempering kinetics of the martensitic phase in DP steel
Waterschoot, T
Verbeken, K
De Cooman, BC
ISIJ INTERNATIONAL, 2006, 46 (01) : 138 - 146
[10] Effect of controlled rolling on the martensitic hardenability of dual phase steel
Mohammad Ajmal
Masood Ahmed Tindyala
Ron Priestner
International Journal of Minerals Metallurgy and Materials, 2009, 16 (02) : 165 - 169

← 1 2 3 4 5 →