Wireless Electrocardiogram Transmission in ISM Band: An Approach Towards Telecardiology

Remote monitoring of biomedical signals provides an opportunity to extend health care service to a distant patient. In this paper, a short range wireless telecardiology system is described with the objective to transmit electrocardiogram signal for remote end acquisition. The acquired signal was compressed using a combination of modified delta encoding and run length encoding technique and transmitted using a wireless transceiver operating in 2.4 GHz industrial, scientific and medical band to a distance of 400 ft. In the receiving end, error check principlewas used to find any data loss before the data is reconstructed for feature extraction. With Physionet data using 8-bit quantization an average compression ratio (CR) of 12.23, percentage root mean squared difference (PRD) of 4.342 and PRD normalized (PRDN) of 9.271 were obtained. With ECG data collected from healthy volunteers, these figures came out to be 14.64, 12.92 and 13.46 respectively. An improvement of performance was observed with 10 bit quantization of ECG data. Computational simplicity of the proposed algorithm provides an opportunity to use a low end microcontroller to implement the compression in standalone hardware.