Experimental investigation of a thermoacoustic refrigerator driven by a standing wave twin thermoacoustic prime mover

被引：24

作者：

Hariharan, N. M. ^{[1
]}

Sivashanmugam, P. ^{[1
]}

Kasthurirengan, S. ^{[2
]}

机构：

[1] Natl Inst Technol, Dept Chem Engn, Tiruchirappalli 620015, Tamil Nadu, India

[2] Indian Inst Sci, Ctr Cryogen Technol, Bangalore 560012, Karnataka, India

来源：

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID | 2013年 / 36卷 / 08期

关键词：

Thermo acoustic refrigerator; Twin-wave thermoacoustic prime mover; Spacing; Hot end temperature; Temperature difference; PULSE TUBE REFRIGERATOR; WORKING FLUID; HEAT-TRANSFER; PERFORMANCE; DESIGN; OPTIMIZATION;

D O I：

10.1016/j.ijrefrig.2013.04.017

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The objective of this study is to analyse the performance of thermoacoustic refrigerator (TAR) measured in terms of hot end temperature and temperature difference across refrigerator stack with two different spacing namely 0.4 mm and 0.8 mm and stack used in refrigerating section was made of low thermal conductivity materials namely Mylar sheet and photographic film & the experiments were carried out at 1 MPa pressure using helium as working fluid. High powered acoustic wave with frequency of 460 Hz and pressure amplitude of congruent to 0.07 MPa was obtained from twin thermoacoustic prime mover (TAPM) and this acoustic wave produced temperature difference of 16 degrees C across the Mylar sheet stack made of 0.4 mm spacing in refrigerator section. From this study, it has been inferred that twin TAPM can act as efficient drive for TAR. (C) 2013 Elsevier Ltd and IIR. All rights reserved.

引用

页码：2420 / 2425

页数：6

共 33 条

[1] Design and construction of a solar-powered, thermoacoustically driven, thermoacoustic refrigerator [J].

Adeff, JA ;

Hofler, TJ .

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2000, 107 (06) :L37-L42

[2]

ANSI/ASME, 1986, 19 ANSIASME PTC

[3] Design and optimization of thermoacoustic devices [J].

Babaei, Hadi ;

Siddiqui, Kamran .

ENERGY CONVERSION AND MANAGEMENT, 2008, 49 (12) :3585-3598

[4] Influence of resonance tube geometry shape on performance of thermoacoustic engine [J].

Bao, Rui ;

Chen, Guobang ;

Tang, Ke ;

Jia, Zhengzhong ;

Cao, Weihua .

ULTRASONICS, 2006, 44 (e1519-e1521) :E1519-E1521

[5] Design and construction of a traveling wave thermoacoustic refrigerator [J].

Bassem, M. M. ;

Ueda, Y. ;

Akisawa, A. .

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2011, 34 (04) :1125-1131

[6]

Bondarenko V.L., 2011, CHEM PET ENG, V47, P7

[7]

Coleman H.W., 1989, EXPT UNCERTAINTY ANA, P189

[8] Detailed study of a traveling wave thermoacoustic refrigerator driven by a traveling wave thermoacoustic engine [J].

Dai, Wei ;

Luo, Ercang ;

Zhang, Yong ;

Ling, Hong .

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2006, 119 (05) :2686-2692

[9]

Gardner David L., 2009, P AC, P23

[10] THERMOACOUSTIC REFRIGERATOR FOR SPACE APPLICATIONS [J].

GARRETT, SL ;

ADEFF, JA ;

HOFLER, TJ .

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 1993, 7 (04) :595-599

← 1 2 3 4 →