CRACK INITIATION PROCESS FOR SEMI-CIRCULAR NOTCHED PLATE IN CREEP-FATIGUE TEST AT ELEVATED TEMPERATURE

被引：0
|
作者：
Watanabe, Osamu [1 ]
Kawasaki, Nobuchika
Bubphachot, Bopit [1 ]
Kasahara, Naoto
机构：
[1] Univ Tsukuba, Dept Engn Mech & Energy, Tsukuba, Ibaraki 3058573, Japan
来源：
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 3 | 2009年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Crack initiation and propagation In creep-fatigue test were observed on semi-circular notched plates at elevated temperature by the CCD video camera. Test specimens are made of SUS304 stainless steel, and temperature is kept to be 550 degrees C, and geometry of the semi-circular plate specimens are changed by diameter size of the hole. Photographs of all cycles were recorded to investigate crack initiation process in structural component having stress concentration and obtain number of cycle of crack initiation (N-c). The test results were compared with predictions by the Stress Redistribution Locus (SRL) method and the Neuber's rule's method.
引用
收藏
页码：731 / 740
页数：10
相关论文
共 50 条
  • [1] CRACK INITIATION PROCESS FOR SEMI-CIRCULAR NOTCHED PLATE IN FATIGUE TEST AT ELEVATED TEMPERATURE
    Bubphachot, Bopit
    Kawasaki, Nobuchika
    Watanabe, Osamu
    Kasahara, Naoto
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 3, 2009, : 721 - 730
  • [2] Crack Initiation Process for Semicircular Notched Plate in Fatigue Test at Elevated Temperature
    Bubphachot, Bopit
    Watanabe, Osamu
    Kawasaki, Nobuchika
    Kasahara, Naoto
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2011, 133 (03):
  • [3] CRACK INITIATION/PROPAGATION OF PERFORATED PLATE UNDER DISPLACEMENT-CONTROLLED CREEP-FATIGUE TEST AT ELEVATED TEMPERATURE
    Watanabe, Osamu
    Akiyama, Taisuke
    Matsuda, Akihiro
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 1, 2012, : 231 - 239
  • [4] THE CRACK INITIATION AND GROWTH UNDER HIGH-TEMPERATURE CREEP, FATIGUE AND CREEP-FATIGUE MULTIPLICATION
    YOKOBORI, AT
    YOKOBORI, T
    ENGINEERING FRACTURE MECHANICS, 1988, 31 (06) : 931 - &
  • [5] Characterisation of creep-fatigue crack growth behaviour for Alloy 617 on circular notched specimen
    Yokobori, A. T., Jr.
    Sugiura, R.
    Sakamoto, A.
    Jinno, K.
    Nonaka, I.
    Matsuzaki, T.
    MATERIALS AT HIGH TEMPERATURES, 2015, 32 (03) : 340 - 346
  • [6] Characterizations of Creep-fatigue Crack Initiation and Growth Life for P92 using Circular Notched Round Bar Specimen
    Sugiura, R.
    Yokobori, A. T., Jr.
    Nakagawa, T.
    Adachi, T.
    Nonaka, I.
    Tabuchi, M.
    Hasegawa, Y.
    Matsuzaki, T.
    Creep-Fatigue Interactions: Test Methods and Models, 2011, 1539 : 67 - 86
  • [7] ASSESSMENT AND TEST OF THE CREEP-FATIGUE CRACK BEHAVIOUR FOR A HIGH TEMPERATURE COMPONENT
    Lee, Hyeong-Yeon
    Lee, Jae-Han
    Nikbin, Kamran
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 1, 2009, : 589 - 596
  • [8] Influence of reference stress formulae on creep and creep-fatigue crack initiation and growth prediction in plate components
    Wasmer, K.
    Nikbin, K. M.
    Webster, G. A.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2010, 87 (08) : 447 - 456
  • [9] Assessment and Test of the Creep-Fatigue Crack Behavior for a High Temperature Component
    Lee, Hyeong-Yeon
    Lee, Jae-Han
    Nikbin, Kamran
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (03):
  • [10] Determination of Creep Compliance of Asphalt Concrete from Notched Semi-Circular Bend (SCB) Test
    Teshale, E. Zegeye
    Stolarski, H. K.
    Marasteanu, M. O.
    EXPERIMENTAL MECHANICS, 2013, 53 (06) : 919 - 928
12345