Delamination of pultruded glass fiber-reinforced polymer composites subjected to axial compression

被引：34

作者：

Bai, Yu ^{[1
]}

Vallee, Till ^{[1
]}

Keller, Thomas ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, CCLab, CH-1015 Lausanne, Switzerland

来源：

COMPOSITE STRUCTURES | 2009年 / 91卷 / 01期

基金：

瑞士国家科学基金会;

关键词：

Glass fiber-reinforced polymer; Pultrusion; Compression; Delamination; Buckling; FAILURE; STRENGTH; BEHAVIOR; JOINTS;

D O I：

10.1016/j.compstruct.2009.04.030

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Axial compression experiments were conducted on pultruded E-glass fiber-rein forced polymer laminates of different slenderness. Second-order deformations greatly increased the bending moments and shear forces of slender specimens. Delamination failure occurred in all specimens, independent of slenderness. Based on measurements of lateral deformations at delamination initiation, the distribution of shear forces was determined and the stress state at failure was obtained and compared to an adopted failure criterion. Ultimate loads were further predicted based on FIE analysis. After delamination, specimens could sustain a residual load, which could be estimated based on a buckling analysis on the separated laminates for specific cases. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：66 / 73

页数：8

共 32 条

[1]

[Anonymous], 2002, Eurocode 3: Design of Steel Structures

[2]

[Anonymous], D317199 ASTM

[3]

*ANSYS INC, REL 10 0 DOC ANSYS

[4] SHEAR COEFFICIENTS FOR THIN-WALLED COMPOSITE BEAMS [J].

BANK, LC .

COMPOSITE STRUCTURES, 1987, 8 (01) :47-61

[5] LOCAL BUCKLING AND FAILURE OF PULTRUDED FIBER-REINFORCED PLASTIC BEAMS [J].

BANK, LC ;

NADIPELLI, M ;

GENTRY, TR .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1994, 116 (02) :233-237

[6]

Bank LC., 1999, J COMPOSITE CONSTR, V3, P177, DOI [DOI 10.1080/10903127.2016.1235240, 10.1061/(ASCE)1090-0268(1999)3:4(177), DOI 10.1061/(ASCE)1090-0268(1999)3:4(177)]

[7]

Barbero E.J., 1999, ASCE Journal of Composites for Construction, V3, P185, DOI DOI 10.1061/(ASCE)1090-0268(1999)3:4(185)

[8]

Barbero EverJ., 1993, Journal of Materials in Civil Engineering, V5, P339

[9] QUADRATIC STRESS CRITERION FOR INITIATION OF DELAMINATION [J].

BREWER, JC ;

LAGACE, PA .

JOURNAL OF COMPOSITE MATERIALS, 1988, 22 (12) :1141-1155

[10] 10-DEG OFF-AXIS TEST FOR SHEAR PROPERTIES IN FIBER COMPOSITES [J].

CHAMIS, CC ;

SINCLAIR, JH .

EXPERIMENTAL MECHANICS, 1977, 17 (09) :339-346

← 1 2 3 4 →