MEASUREMENT AND SIMULATION OF EDGE DEFECTS IN TURNING OF SICP/AL COMPOSITES

被引：0

作者：

Zhou, L. ^{[1
]}

Wang, C. Z. ^{[1
]}

Ding, H. ^{[1
]}

机构：

[1] Shenyang Ligong Univ, Sch Mech Engn, Shenyang 110159, Peoples R China

来源：

20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS | 2015年

基金：

美国国家科学基金会;

关键词：

SiCp/Al composite; Turning; Finite element simulation; Edge defects; TOOL WEAR; SURFACE-ROUGHNESS; MATRIX; PARTICLES; DELAMINATION; COATINGS; BREAKOUT; FRACTURE; QUALITY;

D O I：

暂无

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this work, a three-dimensional finite element simulation along with an experimental method were carried out to study the edge defects in turning of SiCp/Al composites. The formation process of edge defects near the exit of turning was analyzed, and the effects of cutting depth, feed rate and spindle speed on the sizes of edge defects were investigated. The results indicate that a negative deformation plane begins to form as the tool approaches the end of the cut and the crack propagation along the negative deformation plane results in the edge defects. In addition, the size of edge defects increases with the increase of cutting depth and feed rate, and the spindle speed has little influence on the size of edge defects. The numerical results were also compared to the turning experimental data and found to be in reasonable agreement.

引用

页数：10

共 23 条

[11] Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite [J].

Kiliçkap, E ;

Çakir, O ;

Aksoy, M ;

Inan, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 :862-867

[12] Burr formation and fracture in oblique cutting [J].

Ko, SL ;

Dornfeld, DA .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 62 (1-3) :24-36

[13] Experimental analysis of drilling fiber reinforced composites [J].

Lazar, Mihai-Bogdan ;

Xirouchakis, Paul .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (12) :937-946

[14] Clustering model on the tensile strength of PM processed SiCp/Al composites [J].

Liu, Z. Y. ;

Wang, Q. Z. ;

Xiao, B. L. ;

Ma, Z. Y. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (11) :1686-1692

[15] Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite [J].

Mandal, Durbadal ;

Viswanathan, Srinath .

MATERIALS CHARACTERIZATION, 2013, 85 :73-81

[16] Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation [J].

Pramanik, A. ;

Zhang, L. C. ;

Arsecularatne, J. A. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (15) :1613-1625

[17] The effects of various multilayer ceramic coatings on the wear of carbide cutting tools when machining metal matrix composites [J].

Sahin, Y .

SURFACE & COATINGS TECHNOLOGY, 2005, 199 (01) :112-117

[18] The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites [J].

Sahin, Y ;

Sur, G .

SURFACE & COATINGS TECHNOLOGY, 2004, 179 (2-3) :349-355

[19] Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites [J].

Song Min .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (06) :1400-1404

[20] Discrete element method (DEM) modeling of fracture and damage in the machining process of polycrystalline SiC [J].

Tan, Yuanqiang ;

Yang, Dongmin ;

Sheng, Yong .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (06) :1029-1037

← 1 2 3 →