Mechanical Properties of PETG Fibres and Their Usage in Carbon Fibres/Epoxy Composite Laminates

被引：6

作者：

Latko-Duralek, Paulina ^{[1
]}

Dydek, Kamil ^{[1
]}

Golonko, Emila ^{[1
]}

Boczkowska, Anna ^{[1
]}

机构：

[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Ul Woloska 141, PL-02507 Warsaw, Poland

来源：

FIBRES & TEXTILES IN EASTERN EUROPE | 2018年 / 26卷 / 02期

关键词：

PETG; fibres; CFRP; mechanical properties; SEM; recycling; INTERLAMINAR FRACTURE-TOUGHNESS; THERMOSETTING COMPOSITES; VEILS; YARN;

D O I：

10.5604/01.3001.0011.5740

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

This paper reports on a melt-spinning process of glycol-modified poly(ethylene terephthalate) PETG and regranulate of PETG. The effect of the processing temperature and winding reel velocity on the diameters of fibres was examined. It was observed with a scanning electron microscope that the surface of fibres produced from recycled PETG are thicker but smoother than fibres made of fresh PETG. Applying a higher drawing velocity helped to decrease the diameters, which were between 75-150 mu m. Under static deformation, fibres showed different behaviour, with higher flexibility and lower strength observed for fibres made of PETG regranulate. Both types of fibre were chopped and added to carbon fibre reinforced polymers as interlayers to investigate their effect on mechanical properties. It was found that the flexural strength decreased in the presence of PETG fibres, while interlaminar shear strength improved, but only in the case of fresh PETG fibres.

引用

页码：61 / 65

页数：5

共 15 条

[1] Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils [J].

Beckermann, Gareth W. ;

Pickering, Kim L. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 72 :11-21

[2] Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG) [J].

Dupaix, RB ;

Boyce, MC .

POLYMER, 2005, 46 (13) :4827-4838

[3]

Elias HG, 1984, FILAMENTS FIBERS FIL

[4] Use of surfactants to remove solvent-based inks from plastic films [J].

Gecol, H ;

Scamehorn, JF ;

Christian, SD ;

Riddell, FE .

COLLOID AND POLYMER SCIENCE, 2003, 281 (12) :1172-1177

[5] Toughening of thermosetting composites with thermoplastic fibres [J].

Hogg, PJ .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 412 (1-2) :97-103

[6] Inclusion of a thermoplastic phase to improve impact and post-impact performances of carbon fibre reinforced thermosetting composites - A review [J].

Nash, N. H. ;

Young, T. M. ;

McGrail, P. T. ;

Stanley, W. F. .

MATERIALS & DESIGN, 2015, 85 :582-597

[7]

Piesowicz E, 2014, A method for recovering polymer from printed PETG substrates, Patent No. [EP 2987822 B1, 2987822]

[8] The influence of the nonwoven veil architectures on interlaminar fracture toughness of interleaved composites [J].

Ramirez, Victor A. ;

Hogg, Paul J. ;

Sampson, William W. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2015, 110 :103-110

[9] Blends of poly(ethylene terephthalate) and epoxy as matrix material for continuous fibre reinforced composites [J].

Saalbrink, A ;

Mureau, M ;

Peijs, T .

PLASTICS RUBBER AND COMPOSITES, 2001, 30 (05) :213-221

[10] Use of cationic surfactant to remove solvent-based ink from rigid high density polyethylene surfaces [J].

Songsiri, D ;

Min, SS ;

Scamehorn, JF ;

Osuwan, S ;

Ellis, JW .

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2002, 204 (1-3) :261-269

← 1 2 →