Pin Addressing Method Based on an SVM With a Reliability Constraint in Digital Microfluidic Biochips

Digital microfluidic biochips (DMFBs) are increasingly important and are used for point-of-care, drug discovery, clinical diagnosis, immunoassays, etc. Pin-constrained DMFBs are an important part of digital microfluidic biochips, and they have gained increasing attention from researchers. However, many previous works have focused on the problem of electrode addressing and aimed to minimize the number of control pins in pin-constrained DMFBs. Although the number of control pins can be effectively redistributed through broadcast addressing technology, the chip reliability will be reduced if the signals are shared arbitrarily. Arbitrary signal sharing can lead to a large number of actuations for many idle electrodes, and as a result, a trapping charge or decreasing contact angle problem could occur for some electrodes, reducing the reliability of the chip. To address this problem, the appropriate electrode matching object should be carefully selected, and the influence of these factors on chip reliability should be fully considered. For this purpose, we aimed to fully consider electrode addressing and the reliability of the chip in improving the reliability of DMFBs. This paper proposed a pin addressing method based on a support vector machine (SVM) with the reliability constraint algorithm, which can fully consider the electrode addressing method and the reliability of the chip together. The proposed method achieved an average maximum number of electrode actuations that was 53.8% and 18.2% smaller than those of the baseline algorithm and the graph-based algorithm, respectively. The simulation experiment results showed that the proposed method can efficiently solve reliability problems during the DMFB design process.