Fretting Fatigue Testing of Carburized Alloy Steel in Very High Cycle Regime Using an Ultrasonic Torsional Fatigue Testing Machine

被引：2

作者：

Shimamura, Yoshinobu ^{[1
]}

Kokubo, Akito ^{[2
]}

Ishii, Hitoshi ^{[1
]}

Tohgo, Keiichiro ^{[1
]}

Fujii, Tomoyuki ^{[1
]}

Yagasaki, Tooru ^{[3
]}

Harada, Masamichi ^{[3
]}

机构：

[1] Shizuoka Univ, Dept Mech Engn, Naka Ku, 3-5-1 Johoku, Hamamatsu, Shizuoka 4328561, Japan

[2] Shizuoka Univ, Naka Ku, Hamamatsu, Shizuoka 4328561, Japan

[3] Honda Res & Dev Co Ltd, Automobile R&D Ctr, Haga-machi, Tochigi, Japan

来源：

11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2 | 2014年 / 891-892卷

关键词：

Fretting fatigue; Carburized alloy steel; Very high cycle regime; Ultrasonic torsional fatigue testing machine; FREQUENCY;

D O I：

10.4028/www.scientific.net/AMR.891-892.1152

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Recently, high-strength alloy steels have been developed and used for various products. It is well known that fretting fatigue does not show fatigue limit. In other words, fretting fatigue failure may occur in very high cycle regime more than 107 cycles. However, it is difficult to investigate fretting fatigue property in very high cycle regime by using conventional fatigue testing machines because it is time-consuming. In this study, a fretting fatigue testing method for carburized alloy steels in very high cycle regime is explored by using an ultrasonic torsional fatigue testing machine. Carburized SCM420H was used for investigation. The experimental results showed that it is possible to conduct fretting fatigue testing of carburized alloy steels by using an ultrasonic torsional fatigue testing machine.

引用

页码：1152 / +

页数：2

共 50 条

[1] Fatigue properties of carburized alloy steel in very high cycle regime under torsional loading
Shimamura, Yoshinobu
Narita, Koichiro
Ishii, Hitoshi
Tohgo, Keiichiro
Fujii, Tomoyuki
Yagasaki, Tooru
Harada, Masamichi
INTERNATIONAL JOURNAL OF FATIGUE, 2014, 60 : 57 - 62
[2] Very High Cycle Fatigue and Ultrasonic Testing in Multiaxial Loading
Costa, Pedro R.
Reis, Luis
Freitas, Manuel
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 197 - 213
[3] Very High Cycle Fatigue Data Acquisition Using High-Accuracy Ultrasonic Fatigue Testing Equipment
Schoenbauer, Bernd M.
Fitzka, Michael
Jaskari, Matias
Jarvenpaa, Antti
Mayer, Herwig
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 172 - 185
[4] Fretting behaviors of a steel up to very high cycle fatigue
Teng, Zhenjie
Liu, Hanqing
Wang, Qingyuan
Huang, Zhiyong
Starke, Peter
WEAR, 2019, 438
[5] Very High Cycle Fatigue Behavior of Additively Manufactured Metals Using Ultrasonic Fatigue Testing: A Critical Assessment of Potentials and Challenges
Haghshenas, Meysam
Simsiriwong, Jutima
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 186 - 196
[6] Review of Multiaxial Testing for Very High Cycle Fatigue: From 'Conventional' to Ultrasonic Machines
Costa, Pedro
Nwawe, Richard
Soares, Henrique
Reis, Luis
Freitas, Manuel
Chen, Yong
Montalvao, Diogo
MACHINES, 2020, 8 (02)
[7] Effect of mean stress in very high cycle fretting fatigue of a bearing steel
Teng, Zhenjie
Wu, Haoran
Huang, Zhiyong
Starke, Peter
INTERNATIONAL JOURNAL OF FATIGUE, 2021, 149
[8] Fretting fatigue testing machine & some test results
Urriolagoitia-Sosa, G
Zarco-Gonzalez, JC
PROCEEDINGS OF THE 6TH INTERNATIONAL DESIGN CONFERENCE: DESIGN 2000, 2000, : 499 - 506
[9] Effects of intermittent loading on fatigue life of a high strength steel in very high cycle fatigue regime
Sun, Chengqi
Song, Qingyuan
Hu, Yuanpei
Wei, Yujie
INTERNATIONAL JOURNAL OF FATIGUE, 2018, 117 : 9 - 12
[10] Application of ultrasonic fatigue technology in very-high-cycle fatigue testing of aviation gas turbine engine blade materials: A review
Zhao, Jiucheng
Wan, Jie
Zhang, Shizhong
Yan, Chuliang
Zhao, Hongwei
SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2024, 67 (05) : 1317 - 1363

← 1 2 3 4 5 →