Corrosion characteristics of newly developed structural DMR-1700 steel and comparison with different steels for industrial applications

被引：4

作者：

Gurrappa, I. ^{[1
]}

Malakondaiah, G. ^{[1
]}

机构：

[1] Def Met Res Lab, Hyderabad 500058, Andhra Pradesh, India

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2006年 / 37A卷 / 10期

关键词：

D O I：

10.1007/s11661-006-0185-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Corrosion characteristics of different steels in industrial environment were studied systematically to understand the protective nature of oxide scales that form on their surfaces with a view to explore the possibility of using a newly developed ultrahigh strength steel, DMR-1700, for fabrication of components to use in industrial applications. Further, the studies related to pitting and crevice corrosion resistance of a variety of steels under industrial environmental conditions have been carried out for comparison purposes. The surface morphologies of corroded steels were observed by scanning electron microscope (SEM) in order to understand the nature of corrosion. The corrosion mechanism of steel components that fail under industrial environmental conditions has been discussed. Based on the results obtained with different techniques, the newly developed DMR-1700 ultrahigh strength low alloy steel in association with successfully developed high-performance protective coating has been recommended for manufacture of components to use in industrial systems. This steel helps in improving the efficiency of the systems significantly by eliminating failures during service.

引用

页码：3039 / 3046

页数：8

共 38 条

[1] The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating [J].

Bajat, JB ;

Miskovic-Stankovic, VB ;

Kacarevic-Popovic, Z .

PROGRESS IN ORGANIC COATINGS, 2003, 47 (01) :49-54

[2] Galvanic alloys Zn-Mn - composition of the corrosion products and their protective ability in sulfate containing medium [J].

Boshkov, N ;

Petrov, K ;

Vitkova, S ;

Raichevsky, G .

SURFACE & COATINGS TECHNOLOGY, 2005, 194 (2-3) :276-282

[3] RETRACTED: Mechanical properties and corrosion resistance of low-alloy steels in atmospheric conditions containing chloride (Retracted article. See vol. 661, pg. 254, 2016) [J].

Chen, YY ;

Tzeng, HJ ;

Wei, LI ;

Shih, HC .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2) :47-59

[4] Corrosion performance of PVD-coated and anodised materials for the decorative market [J].

Fenker, M ;

Jackson, N ;

Spolding, M ;

Nicole, P ;

Schönhut, K ;

Gregory, G ;

Hovsepian, PE ;

Münz, WD .

SURFACE & COATINGS TECHNOLOGY, 2004, 188 :466-472

[5]

GOY W, 1992, WERKST KORROS, V43, P270

[6]

GREEN SJ, 1987, METALS HDB, V13, P550

[7] High corrosion-resistant Ni-P/Ni/Ni-P multilayer coatings on steel [J].

Gu, CD ;

Lian, JS ;

Li, GY ;

Niu, LY ;

Jiang, ZH .

SURFACE & COATINGS TECHNOLOGY, 2005, 197 (01) :61-67

[8] Corrosion characteristics of permanent magnets in acidic environments [J].

Gurappa, I .

JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 360 (1-2) :236-242

[9] Protection of titanium alloy components against high temperature corrosion [J].

Gurappa, I .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2) :372-380

[10] Cathodic protection of cooling water systems and selection of appropriate materials [J].

Gurrappa, I .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 166 (02) :256-267

← 1 2 3 4 →