Heat fluxes at metal-mold interface during casting solidification

被引：0

作者：

Sabau, Adrian S. ^{[1
]}

机构：

[1] Oak Ridge Natl Lab, Div Met & Ceram, Oak Ridge, TN 37831 USA

来源：

LIGHT METALS 2006 VOL 4: CAST SHOP TECHNOLOGY AND RECYCLING - ALUMINUM | 2006年

关键词：

heat flux; heat transfer coefficient; sensor; inverse heat transfer analysis; casting; solidification;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this paper, the heat transfer at the metal-mold interfaces is investigated using a sensor for the direct measurement of heat flux. Casting experiments were conducted using graphite molds for aluminum alloy A356. Several casting experiments were performed using a graphite coating and a boron nitride coating. The temperature of the mold surface was provided by the HFS while the temperature of the casting surface was measured using a thermocouple. Results for the heat transfer coefficients were obtained based on measured heat flux and temperatures. Four stages were clearly identified for the variation in time of the heat flux. Values of the heat transfer coefficient were in good agreement with data from previous studies.

引用

页码：827 / 832

页数：6

共 50 条

[41] Identification of interfacial heat transfer coefficient during casting solidification based on an inverse heat conduction model [J].

Zhang, Liqiang ;

Li, Luoxing .

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2013, 20 (01) :27-34

[42] Effect of mold vibration on the solidification process during gravity die casting of AA 356 [J].

Abu-Dheir, N ;

Khraisheh, M ;

Saito, K ;

Male, A .

SOLIDIFICATION OF ALUMINUM ALLOYS, 2004, :361-368

[43] MATHEMATICAL SIMULATION OF METAL SOLIDIFICATION IN A WEDGE-LIKE CASTING MOLD WITH ALLOWANCE FOR NATURAL CONVECTION [J].

Aleksandrov, V. D. ;

Golodenko, N. N. ;

Dremov, V. V. ;

Nedopekin, F. V. .

JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 2010, 83 (03) :505-512

[44] A Combined Experimental-Numerical Method for Determining the Heat Transfer Coefficient at a Fluid Flowing Molten Copper-Casting Mold Interface [J].

Motoyama, Yuichi ;

Tokunaga, Hitoshi ;

Matsushita, Akira ;

Sakamoto, Toshio ;

Okane, Toshimitsu .

INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) :158-169

[45] Numerical Investigations of Stirring Induced Flow on Solidification and Interface Behavior in Continuous Casting Mold With Bifurcated Nozzle [J].

Gupta, Vipul Kumar ;

Jha, Pradeep Kumar ;

Jain, Pramod Kumar .

ASME JOURNAL OF HEAT AND MASS TRANSFER, 2024, 146 (06)

[46] Heat transfer at the metal/substrate interface during solidification of Pb-Sn solder alloys [J].

Prabhu, KN ;

Kumar, ST ;

Venkataraman, N .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2002, 11 (03) :265-273

[47] Heat transfer at the metal/substrate interface during solidification of Pb-Sn solder alloys [J].

K. Narayan Prabhu ;

S. T. Kumar ;

N. Venkataraman .

Journal of Materials Engineering and Performance, 2002, 11 :265-273

[48] Effects of solid fraction on the heat transfer coefficient at the casting/mold interface for permanent mold casting of AZ91D magnesium alloy [J].

Kuo, Jer-Haur ;

Weng, Ruey-Jer ;

Hwang, Weng-Sing .

MATERIALS TRANSACTIONS, 2006, 47 (10) :2547-2554

[49] Development of an inverse heat conduction model and its application to determination of heat transfer coefficient during casting solidification [J].

Liqiang Zhang ;

Carl Reilly ;

Luoxing Li ;

Steve Cockcroft ;

Lu Yao .

Heat and Mass Transfer, 2014, 50 :945-955

[50] On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold [J].

Vakhrushev, Alexander ;

Kharicha, Abdellah ;

Wu, Menghuai ;

Ludwig, Andreas ;

Tang, Yong ;

Hackl, Gernot ;

Nitzl, Gerald ;

Watzinger, Josef ;

Bohacek, Jan .

METALS, 2021, 11 (09)

← 1 2 3 4 5 →