As-cast microstructures and behavior at high temperature of chromium-rich cobalt-based alloys containing hafnium carbides

被引:18
|
作者
Berthod, Patrice [1 ]
Conrath, Elodie [1 ]
机构
[1] Nancy Univ, Fac Sci & Tech, Team Surface & Interface Chem React Mat, Inst Jean Lamour,Dept Chem & Phys Solids & Surfac, F-54506 Vandoeuvre Les Nancy, France
关键词
Alloys; Solidification; Electron microscopy; Hardness; Microstructure; Oxidation; HF; SUPERALLOYS; OXIDATION; EVOLUTION; ZR;
D O I
10.1016/j.matchemphys.2013.11.014
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Hafnium is often used to improve the high temperature oxidation resistance of superalloys but not to form carbides for strengthen them against creep. In this work hafnium was added in cobalt-based alloys for verifying that HfC can be obtained in cobalt-based alloys and for characterizing their behavior at a very temperature. Three Co-25Cr-0.25 and 0.50C alloys containing 3.7 and 7.4 Hf to promote HfC carbides, and four Co-25Cr-0 to 1C alloys for comparison (all contents in wt.%), were cast and exposed at 1200 degrees C for 50 h in synthetic air. The HfC carbides formed instead chromium carbides during solidification, in eutectic with matrix and as dispersed compact particles. During the stage at 1200 degrees C the HfC carbides did not significantly evolve, even near the oxidation front despite oxidation early become very fast and generalized. At the same time the chromium carbides present in the Co-Cr-C alloys totally disappeared in the same conditions. Such HfC-alloys potentially bring efficient and sustainable mechanical strengthening at high temperature, but their hot oxidation resistance must be significantly improved. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:1139 / 1148
页数:10
相关论文
共 50 条
  • [31] Effect of NbC Addition on the High-Temperature Oxidation Resistance of Co- and Ni-Based Chromium-Rich Alloys
    Mélissa Ritouet
    Patrice Berthod
    Oxidation of Metals, 2018, 89 : 339 - 355
  • [32] High-temperature oxidation behavior of as-cast Ni-Cr-Al-Fe based alloys
    Han, Chao
    Liu, Yong
    Wang, Yan
    Li, Wei-Jie
    Tang, Hui-Ping
    Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2011, 16 (06): : 806 - 814
  • [33] Influence of Chromium Carbides on the High Temperature Oxidation Behavior and on Chromium Diffusion in Nickel-Base Alloys
    Patrice Berthod
    Oxidation of Metals, 2007, 68 : 77 - 96
  • [34] Influence of chromium carbides on the high temperature oxidation behavior and on chromium diffusion in nickel-base alloys
    Berthod, Patrice
    OXIDATION OF METALS, 2007, 68 (1-2): : 77 - 96
  • [35] CORROSION BEHAVIOR OF CAST AND FORGED COBALT-BASED ALLOYS FOR DOUBLE-ALLOY JOINT ENDOPROSTHESES
    SURY, P
    SEMLITSCH, M
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1978, 12 (05): : 723 - 741
  • [36] Effect of La Addition on Inclusions, Microstructures, and High-Temperature Mechanical Properties of As-Cast FeCrAl Alloys
    He, Yang
    Liu, Jianhua
    Yang, Yindong
    McLean, Alex
    10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2019, : 427 - 434
  • [37] DEFORMATION-BEHAVIOR OF NIAL-BASED ALLOYS CONTAINING IRON, COBALT, AND HAFNIUM
    PANK, DR
    NATHAL, MV
    KOSS, DA
    HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS III, 1989, 133 : 561 - 566
  • [38] High ductile as-cast Mg-RE based alloys at room temperature
    Peng, Qiuming
    Huang, Yuanding
    Kainer, Karl Ulrich
    Hort, Norbert
    MATERIALS LETTERS, 2012, 83 : 209 - 212
  • [39] Cyclic oxidation of high temperature coatings on new γ′-strengthened cobalt-based alloys
    Vermaak, N.
    Mottura, A.
    Pollock, T. M.
    CORROSION SCIENCE, 2013, 75 : 300 - 308
  • [40] HIGH-TEMPERATURE COMPRESSIVE BEHAVIOR OF AS-CAST AL-CU ALLOYS OF VARYING COMPOSITION
    NASSEF, GA
    SUERY, M
    JOURNAL OF MATERIALS SCIENCE, 1983, 18 (10) : 3031 - 3040