Effect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic Application

被引：0
|
作者：
Arif, W. M. [1 ]
Yeoh, C. K. [1 ]
Teh, P. L. [1 ]
Lim, J. H. [1 ]
Noorina, H. J. [1 ]
机构：
[1] Univ Malaysia Perilis, Sch Mat Engn, Jejawi 02600, Perlis, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013) | 2013年 / 795卷
关键词：
input power; mass flow rate; heat flux; heat transfer coefficient; thermal resistance;
D O I：
10.4028/www.scientific.net/AMR.795.591
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify cooling performance of distilled water and vegetable oil at different mass flow rates (distilled water: 8.00g/s, 10.60g/s & 13.24g/s; vegetable oil: 1.22g/s, 1.30g/s & 1.38g/s) and input power (29.12W & 47.66W). The cooling performance of each fluid was characterized by the properties of: heat transfer coefficient, thermal resistance and also, the maximum CPU temperature (T4 at 66min) for the experiments. Experimental data shows that cooling performance was improved at higher mass flow rate and both distilled water and vegetable oil is a good coolant material.
引用
收藏
页码：591 / 596
页数：6
相关论文
共 50 条
  • [41] Application of the Dispersed Low-Pressure Gas-Liquid Flow in the Cooling System of Lithium Divertor Plates of the Tokamak
    Vertkov, A. V.
    Zharkov, M. Yu
    Zakharenkov, A., V
    PHYSICS OF ATOMIC NUCLEI, 2022, 85 : S109 - S115
  • [42] THERMAL PERFORMANCE OF A THERMOELECTRIC AIR-COOLING SYSTEM WITH HEAT SINKS
    Karng, Sarng Woo
    Shin, Jae-Hoon
    Han, Hun Sik
    Kim, Yun Ho
    Kim, Seo Young
    2010 12TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, 2010,
  • [43] Field evaluation of performance of radiant heating/cooling ceiling panel system
    Li, Rongling
    Yoshidomi, Togo
    Ooka, Ryozo
    Olesen, Bjarne W.
    ENERGY AND BUILDINGS, 2015, 86 : 58 - 65
  • [44] Development of a cooling capability test method for liquid-cooled textile system
    Cao, HT
    Branson, DH
    Nam, JH
    Peksoz, S
    Farr, CA
    Performance of Protective Clothing: Global Needs and Emerging Markets: 8th Symposium, 2005, : 111 - 120
  • [45] Analysis of Thermal Performance Metrics-Application to CPU Cooling in HPC Servers
    Guggari, Shrishail I.
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2021, 11 (02): : 222 - 232
  • [46] An Experimental Comparison between a Novel and a Conventional Cooling System for the Blown Film Process
    Janas, M.
    Andretzky, M.
    Neubert, B.
    Kracht, F.
    Wortberg, J.
    PROCEEDINGS OF PPS-31: THE 31ST INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 2016, 1713
  • [47] Two-phase closed thermosyphon vapor-chamber system for electronic cooling
    Tsai, Te-En
    Wu, Hsin-Hsuan
    Chang, Chih-Chung
    Chen, Sih-Li
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (05) : 484 - 489
  • [48] Design of Practical Liquid Metal Cooling Device for Heat Dissipation of High Performance CPUs
    Deng, Yueguang
    Liu, Jing
    JOURNAL OF ELECTRONIC PACKAGING, 2010, 132 (03)
  • [49] Study of the performance of an integrated liquid cooling heat sink for high-power IGBTs
    Pan, Minqiang
    Hu, minglong
    Wang, hongqing
    APPLIED THERMAL ENGINEERING, 2021, 190
  • [50] The effect of the important variables for the design novel milli-channel cooling system on the evaporator performance by the Taguchi method
    Koca, Aliihsan
    Mustafaoglu, Mansur
    Karakoyun, Yakup
    Dalkilic, Ahmet Selim
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2025,
12345