Effect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic Application

被引：0
|
作者：
Arif, W. M. [1 ]
Yeoh, C. K. [1 ]
Teh, P. L. [1 ]
Lim, J. H. [1 ]
Noorina, H. J. [1 ]
机构：
[1] Univ Malaysia Perilis, Sch Mat Engn, Jejawi 02600, Perlis, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013) | 2013年 / 795卷
关键词：
input power; mass flow rate; heat flux; heat transfer coefficient; thermal resistance;
D O I：
10.4028/www.scientific.net/AMR.795.591
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify cooling performance of distilled water and vegetable oil at different mass flow rates (distilled water: 8.00g/s, 10.60g/s & 13.24g/s; vegetable oil: 1.22g/s, 1.30g/s & 1.38g/s) and input power (29.12W & 47.66W). The cooling performance of each fluid was characterized by the properties of: heat transfer coefficient, thermal resistance and also, the maximum CPU temperature (T4 at 66min) for the experiments. Experimental data shows that cooling performance was improved at higher mass flow rate and both distilled water and vegetable oil is a good coolant material.
引用
收藏
页码：591 / 596
页数：6
相关论文
共 50 条
  • [21] Cooling performance of a nanofluid flow in a heat sink microchannel with axial conduction effect
    M. Izadi
    M. M. Shahmardan
    M. Norouzi
    A. M. Rashidi
    A. Behzadmehr
    Applied Physics A, 2014, 117 : 1821 - 1833
  • [22] INFLUENCE OF OPERATION PARAMETERS ON THE COOLING PERFORMANCE OF WATER-AIR NOZZLES
    Preuler, Lukas
    Bernhard, Christian
    Ilie, Sergiu
    Six, Jakob
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 45 - 51
  • [23] Effect of Cooling System Design on Engine Oil Temperature
    Singh, O. P.
    Garg, M.
    Kumar, V.
    Chaudhary, Y. V.
    JOURNAL OF APPLIED FLUID MECHANICS, 2013, 6 (01) : 61 - 71
  • [24] Experimental and numerical investigation of circular minichannel heat sinks with various hydraulic diameter for electronic cooling application
    Ghasemi, Seyed Ebrahim
    Ranjbar, A. A.
    Hosseini, M. J.
    MICROELECTRONICS RELIABILITY, 2017, 73 : 97 - 105
  • [25] Experimental study on the application of paraffin slurry to high density electronic package cooling
    K. Cho
    M. Choi
    Heat and Mass Transfer, 2000, 36 : 29 - 36
  • [26] Comprehensive fuzzy logic coefficient of performance of absorption cooling system
    Imamovic, Besim
    Halilcevic, Suad S.
    Georgilakis, Pavlos S.
    EXPERT SYSTEMS WITH APPLICATIONS, 2022, 190
  • [27] Investigations on performance of single-phase immersion cooling system
    Shrigondekar, Harshad
    Lin, Yueh-Cheng
    Wang, Chi-Chuan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 206
  • [28] Effect of Nozzle Geometry and Distance on Cooling Performance of Impinging Jets
    Kobayashi, Hirokazu
    Kabeya, Kazuhisa
    Takashima, Yukio
    Takahashi, Hideyuki
    Takeda, Gentaro
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2017, 103 (08): : 458 - 467
  • [29] Effect of Nozzle Geometry and Distance on Cooling Performance of Impinging Jets
    Kobayashi, Hirokazu
    Kabeya, Kazuhisa
    Takashima, Yukio
    Takahashi, Hideyuki
    Takeda, Gentaro
    ISIJ INTERNATIONAL, 2018, 58 (08) : 1500 - 1509
  • [30] Effect of installing rings on the cooling performance of a pin fin heatsink
    Sung, Gibong
    Kang, Hyeon-Min
    Yook, Se-Jin
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 210
12345