Effect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic Application

被引：0
|
作者：
Arif, W. M. [1 ]
Yeoh, C. K. [1 ]
Teh, P. L. [1 ]
Lim, J. H. [1 ]
Noorina, H. J. [1 ]
机构：
[1] Univ Malaysia Perilis, Sch Mat Engn, Jejawi 02600, Perlis, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013) | 2013年 / 795卷
关键词：
input power; mass flow rate; heat flux; heat transfer coefficient; thermal resistance;
D O I：
10.4028/www.scientific.net/AMR.795.591
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify cooling performance of distilled water and vegetable oil at different mass flow rates (distilled water: 8.00g/s, 10.60g/s & 13.24g/s; vegetable oil: 1.22g/s, 1.30g/s & 1.38g/s) and input power (29.12W & 47.66W). The cooling performance of each fluid was characterized by the properties of: heat transfer coefficient, thermal resistance and also, the maximum CPU temperature (T4 at 66min) for the experiments. Experimental data shows that cooling performance was improved at higher mass flow rate and both distilled water and vegetable oil is a good coolant material.
引用
收藏
页码：591 / 596
页数：6
相关论文
共 50 条
  • [1] L-type heat pipes application in electronic cooling system
    Wang, Jung-Chang
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (01) : 97 - 105
  • [2] Performance evaluation and optimization of flattened microchannel heat sinks for the electronic cooling application
    S. M. Ayatollahi
    A. Ahmadpour
    M. R. Hajmohammadi
    Journal of Thermal Analysis and Calorimetry, 2022, 147 : 3267 - 3281
  • [3] Performance evaluation and optimization of flattened microchannel heat sinks for the electronic cooling application
    Ayatollahi, S. M.
    Ahmadpour, A.
    Hajmohammadi, M. R.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2022, 147 (04) : 3267 - 3281
  • [4] Experimental investigation on the thermal performance of vapor chamber in a compound liquid cooling system
    Li, Weiping
    Li, Longjian
    Cui, Wenzhi
    Guo, Mengting
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 170
  • [5] Performance of heat pipe with nanorefrigerant in electronic cooling applications
    Veerasamy, Aruna
    Balakrishnan, Kanimozhi
    Razack, Sirajunnisa Abdul
    MATERIALS TODAY-PROCEEDINGS, 2022, 65 : 375 - 379
  • [6] Cooling Performance Analysis of ThePrimary Cooling System ReactorTRIGA-2000Bandung
    Irianto, I. D.
    Dibyo, S.
    Bakhri, S.
    Sunaryo, G. R.
    INTERNATIONAL CONFERENCE ON NUCLEAR ENERGY TECHNOLOGIES AND SCIENCES (ICONETS 2017), 2018, 962
  • [7] Investigation on the heat transfer performance of BeO-water nanofluid in an electronic cooling system
    Selvaraj, Vishnuprasad
    Morri, Bindusai
    Senthilkumar, Karthick
    Krishnan, Haribabu
    PROCEEDINGS OF THE 25TH NATIONAL AND 3RD INTERNATIONAL ISHMT-ASTFE HEAT AND MASS TRANSFER CONFERENCE, IHMTC 2019, 2019,
  • [8] Effect of Geometry Variations on the Cooling Performance of Fan-Shaped Cooling Holes
    Saumweber, Christian
    Schulz, Achmed
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (06):
  • [9] An investigation of magnet parameters on the performance of dual piezoelectric fans (DPF) in electronics cooling system
    Fadhilah, Abdul Razak
    Robiah, Ahmad
    Shamsul, Sarip
    2017 IEEE 4TH INTERNATIONAL CONFERENCE ON SMART INSTRUMENTATION, MEASUREMENT AND APPLICATION (ICSIMA 2017), 2017,
  • [10] Miniature Vapor Compressor Refrigeration System for Electronic Cooling
    Chang, Chih-Chung
    Liang, Nai-Wen
    Chen, Sih-Li
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2010, 33 (04): : 794 - 800
12345