Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples

被引:23
作者
Franke, Oliver [1 ]
Durst, Karsten [1 ]
Goeken, Mathias [1 ]
机构
[1] Univ Erlangen Nurnberg, Dept Mat Sci, Inst 1, D-91508 Erlangen, Germany
关键词
MECHANICAL-PROPERTIES; PLASTIC-DEFORMATION; METALLIC MATERIALS; PHASE-DIAGRAMS; COMBINATORIAL APPROACH; MULTIPLE APPROACH; ELASTIC-MODULUS; INDENTATION; HARDNESS; SIZE;
D O I
10.1557/JMR.2009.0135
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this work the hardening effect of Ta and Mo in Ni-base alloys was investigated using a combinatorial approach with diffusion Couples. Furthermore, the Ni-Fe system was used as a reference system taking advantage of the full miscibility at high temperatures. Ta was chosen, as aside from having a technical relevance in the Ni-base superalloys, it also has a high miscibility in Ni. The main focus of this paper will be solid solution hardening. It will be shown that even though the determination of hardness is subject to varying indentation size effects (ISE) [K. Durst et al., Acto Mater. 55(20), 6825 (2007)], only a few modifications are necessary to describe solid solution strengthening measured by nanoindentations using the Labusch theory [R. Labusch, Acta Metall. 20(7), 917 (1972)]. Moreover, after a careful evaluation of the results, the data call be used to investigate solid solution hardening effects quickly and efficiently with small amounts of material.
引用
收藏
页码:1127 / 1134
页数:8
相关论文
共 33 条
[1]   PLASTIC DEFORMATION OF NI-CR SINGLE CRYSTALS [J].
AKHTAR, A ;
TEGHTSOO.E .
METALLURGICAL TRANSACTIONS, 1971, 2 (10) :2757-&
[2]   PLASTIC INDENTATION IN METALS WITH CONES [J].
ATKINS, AG ;
TABOR, D .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1965, 13 (03) :149-&
[3]   Determination of plastic properties of polycrystalline metallic materials by nanoindentation:: experiments and finite element simulations [J].
Backes, B. ;
Durst, K. ;
Goeken, M. .
PHILOSOPHICAL MAGAZINE, 2006, 86 (33-35) :5541-5551
[4]   Effect of solid solution impurities on dislocation nucleation during nanoindentation [J].
Bahr, DF ;
Vasquez, G .
JOURNAL OF MATERIALS RESEARCH, 2005, 20 (08) :1947-1951
[5]   EFFECT OF STACKING-FAULT ENERGY ON PLASTIC-DEFORMATION OF POLYCRYSTALLINE NI-CO ALLOYS [J].
DAVIES, CKL ;
SAGAR, V ;
STEVENS, RN .
ACTA METALLURGICA, 1973, 21 (10) :1343-1352
[6]   Indentation size effect in Ni-Fe solid solutions [J].
Durst, K. ;
Franke, O. ;
Boehner, A. ;
Goeken, M. .
ACTA MATERIALIA, 2007, 55 (20) :6825-6833
[7]   Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys [J].
Durst, K ;
Göken, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 :312-316
[8]   Indentation size effect in metallic materials:: Correcting for the size of the plastic zone [J].
Durst, K ;
Backes, B ;
Göken, M .
SCRIPTA MATERIALIA, 2005, 52 (11) :1093-1097
[9]   Indentation size effect in metallic materials:: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations [J].
Durst, Karsten ;
Backes, Bjoern ;
Franke, Oliver ;
Goeken, Mathias .
ACTA MATERIALIA, 2006, 54 (09) :2547-2555
[10]   PLASTIC-DEFORMATION OF FE-NI INVAR-ALLOYS [J].
FLOR, H ;
GUDLADT, HJ ;
SCHWINK, C .
ACTA METALLURGICA, 1980, 28 (12) :1611-1619