Research on Acoustic Emission Signals Characteristics of Pitting Corrosion on 304 Stainless Steel

被引：0
|
作者：
Zhang, Zhongzheng [1 ]
Liang, Hua [1 ]
Ye, Cheng [1 ]
Cai, Wensheng [1 ]
Jiang, Jun [1 ]
Cui, Qiang [1 ]
机构：
[1] Nanjing Boiler Pressure Vessel Supervis & Inspect, Nanjing, Jiangsu, Peoples R China
来源：
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 1B: CODES AND STANDARDS | 2014年
关键词：
304 stainless steel; pitting corrosion; acoustic emission; higher than normal temperature;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In order to study acoustic emission (AE) signals waveform characteristics of pitting corrosion on 304 stainless steel under higher temperature than lower one, Pitting corrosion process on 304 stainless steel in 6% ferric chloride solution at 70 degrees C was monitored by AE technology. Wavelet transform and mode acoustic emission technology were combined to deal with recorded AE signals, and micromorphologic observation was performed for further verification. The results showed that signal waveform was mainly composed of low-frequency (<100KHz) flexural wave with larger amplitude & energy and high-frequency (>100KHz) expansion wave with lesser amplitude & energy. The research results have some certain significance for AE monitoring of pitting corrosion on 304 stainless steel.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Acoustic emission during pitting corrosion of 304 stainless steel
    Xu, Jian
    Wu, Xinqiang
    Han, En-Hou
    CORROSION SCIENCE, 2011, 53 (04) : 1537 - 1546
  • [2] Acoustic Emission of Hydrogen Bubbles on the Counter Electrode during Pitting Corrosion of 304 Stainless Steel
    Wu, Kaige
    Jung, Woo-Sang
    Byeon, Jai-Won
    MATERIALS TRANSACTIONS, 2015, 56 (04) : 587 - 592
  • [3] Morphological estimation of pitting corrosion on vertically positioned 304 stainless steel using acoustic-emission duration parameter
    Wu, Kaige
    Byeon, Jai-Won
    CORROSION SCIENCE, 2019, 148 : 331 - 337
  • [4] Investigation of pitting corrosion of stainless steel by means of acoustic emission and potentiodynamic methods
    Darowicki, K
    Mirakowski, A
    Krakowiak, S
    CORROSION SCIENCE, 2003, 45 (08) : 1747 - 1756
  • [5] Detection of corrosion on 304 stainless steel by acoustic emission measurement
    Du, Gang
    Wang, Weikui
    Song, Shizhe
    Jin, Shijiu
    ANTI-CORROSION METHODS AND MATERIALS, 2010, 57 (03) : 126 - 132
  • [6] ACOUSTIC EMISSION CHARACTERISTICS OF STRESS CORROSION CRACKS IN A TYPE 304 STAINLESS STEEL TUBE
    Hwang, Woonggi
    Bae, Seunggi
    Kim, Jaeseong
    Kang, Sungsik
    Kwag, Nogwon
    Lee, Boyoung
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2015, 47 (04) : 454 - 460
  • [7] Cluster analysis of acoustic emission signals in pitting corrosion of low carbon steel
    Bi, H.
    Li, Z.
    Hu, D.
    Toku-Gyamerah, I.
    Cheng, Y.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (07) : 736 - 746
  • [8] Acoustic emission monitoring during open-morphological pitting corrosion of 304 stainless steel passivated in dilute nitric acid
    Wu, Kaige
    Kim, Jae-Yeon
    CORROSION SCIENCE, 2021, 180
  • [9] Acoustic emission from pitting corrosion in stressed stainless steel plate
    Lee, C. K.
    Scholey, J. J.
    Worthington, S. E.
    Wilcox, P. D.
    Wisnom, M. R.
    Friswell, M. I.
    Drinkwater, B. W.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2008, 43 (01) : 54 - 63
  • [10] Research on pitting corrosion characteristics of X90 steel based on acoustic emission and electrochemistry methods
    Bi, Haisheng
    Miao, Jiaxu
    Sun, Zhifeng
    Zhang, Yuhong
    Zhou, Yangyang
    Zhang, Chen
    Ma, Chunxun
    Li, Huiyao
    ARABIAN JOURNAL OF CHEMISTRY, 2023, 16 (11)
12345