Investigation of patch hybridization effect on the composite patch repair of a cracked aluminum plate: A pragmatic approach

被引:16
作者
Makwana, Alpesh H. [1 ]
Shaikh, A. A. [1 ]
Bakare, A. K. [2 ]
Chitturi, Saikrishna [1 ]
机构
[1] SV Natl Inst Technol, Dept Mech Engn, Surat 395007, Gujarat, India
[2] Reg Ctr Mil Airworthiness, Nasik, Maharashtra, India
关键词
Composite patch repair; hybrid composite; micromechanical model; J-integral; interfacial stresses; AIRCRAFT; BEHAVIOR; DESIGN; PERFORMANCE;
D O I
10.1080/15376494.2018.1432818
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A distinct perspective of using the hybrid composite patches with varying stiffness for repair of a cracked Al 6061-T6 plate and its influence on repair performance is presented. The hybrid composite patches of carbon and glass fibers are considered. The volume fraction of constituents is selected in accordance with the required stiffness ratio. Numerical analysis is performed to evaluate the J-Integral, reduction factor of SIF and interfacial stresses. Patch hybridization has restricted the J-Integral and shown positive impact on interfacial stresses at the edges. The obtained results indicate that the hybrid composite patches have ensured alternative and effective repair solution.
引用
收藏
页码:1458 / 1468
页数:11
相关论文
共 25 条
  • [1] Micromechanical characterization of tensile strength of fiber composite materials
    Abu-Farsakh, GA
    Abdel-Jawad, YA
    Abu-Laila, KM
    [J]. MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES, 2000, 7 (01): : 105 - 122
  • [2] Effect of patch hybridization on the tensile behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring
    Andrew, J. Jefferson
    Arumugam, V.
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 74 : 155 - 166
  • [3] Bonded composite repair of fatigue-cracked primary aircraft structure
    Baker, A
    [J]. COMPOSITE STRUCTURES, 1999, 47 (1-4) : 431 - 443
  • [4] Mechanical properties of hybrid composites using finite element method based micromechanics
    Banerjee, Sayan
    Sankar, Bhavani V.
    [J]. COMPOSITES PART B-ENGINEERING, 2014, 58 : 318 - 327
  • [5] Effect of stacking sequence of the bonded composite patch on repair performance
    Beloufa, Hadja Imane
    Ouinas, Djamel
    Tarfaoui, Mostapha
    Benderdouche, Noureddine
    [J]. STRUCTURAL ENGINEERING AND MECHANICS, 2016, 57 (02) : 295 - 313
  • [6] Analysis of the adhesive damage for different patch shapes in bonded composite repair of aircraft structures
    Benyahia, F.
    Albedah, A.
    Bouiadjra, B. Bachir
    [J]. MATERIALS & DESIGN, 2014, 54 : 18 - 24
  • [7] Micromechanics Modeling and Prediction of Stiffness Degradation Behavior of a Fiber Reinforced Polymer Nanocomposite Under Block Amplitude Fatigue Loads
    Bojja, Ramesh
    Chandra, A. R. Anil
    Jagannathan, N.
    Manjunatha, C. M.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (02) : 403 - 407
  • [8] SIF for inclined cracks repaired with double and single composite patch
    Bouiadjra, B. Bachir
    Fekirini, H.
    Serier, B.
    Benguediab, M.
    [J]. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2007, 14 (04) : 303 - 308
  • [9] Restoration of the mechanical performance of damaged Al panels using bonded composite repair patches
    Constantin, Nicolae
    Sandu, Marin
    Sorohan, Stefan
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 42 : 69 - 76
  • [10] Das S., 2016, Global carbon fiber composites supply chain competitiveness analysis