UVA and UVB light emitting diodes with AlyGa1-yN quantum dot active regions covering the 305-335 nm range

被引：10

作者：

Brault, J. ^{[1
]}

Al Khalfioui, M. ^{[1
]}

Matta, S. ^{[1
,2
]}

Damilano, B. ^{[1
]}

Leroux, M. ^{[1
]}

Chenot, S. ^{[1
]}

Korytov, M. ^{[1
]}

Nkeck, J. E. ^{[1
]}

Vennegues, P. ^{[1
]}

Duboz, J-Y ^{[1
]}

Massies, J. ^{[1
]}

Gil, B. ^{[2
]}

机构：

[1] Univ Cote Azur, CNRS, CRHEA, F-06560 Valbonne, France

[2] Univ Montpellier 2, CNRS, L2C, UMR 5221, F-34095 Montpellier, France

来源：

SEMICONDUCTOR SCIENCE AND TECHNOLOGY | 2018年 / 33卷 / 07期

关键词：

AlGaN; quantum dots; UV LEDs; molecular beam epitaxy; TEMPERATURE; DEPENDENCE; MODE;

D O I：

10.1088/1361-6641/aac3bf

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Ultra-violet (UV) light emitting diodes (LEDs) using III-N quantum dot (QD) active regions have been fabricated by molecular beam epitaxy on (0001)-oriented sapphire substrates. By using the epitaxial compressive stress between the QD material and the template/barrier layers, leading to a 2D-3D growth mode transition, self-assembled QDs with a nominal Al composition of 10% and 20% have been fabricated on A(10.6)Ga(0.4)N. Atomic force microscopy and transmission electron microscopy measurements show high QD densities, ranging between 2 x 10(11)-5 x 10(11) cm(-2), and height and diameter distributions between 1.5-3 nm and 5-20 nm. LED structures including two different AlyGa1-yN/Al0.6Ga0.4N (0001) QD active regions have then been fabricated and processed using a standard planar geometry and squared mesa structures. Current voltage characteristics and electroluminescence (EL) measurements have been performed at room temperature. In particular, the EL properties are investigated in terms of spectral range and wavelength shift as a function of the injection current density. Typically, an emission between 325 and 335 nm is obtained for Al0.2Ga0.9N QDs and between 305 and 320 nm for Al0.2Ga0.8N QDs. The LED characteristics (EL wavelength and broadening) are then correlated to the QD structural properties and the results, supported by calculations, show the main influence of the QD height dispersion and composition fluctuations. Finally, the light output intensity variation as a function of the injection current density has also been investigated and is discussed in terms of injection and recombination mechanisms in the devices.

引用

页数：11

共 42 条

[1] Internal Quantum Efficiency of Whole-Composition-Range AlGaN Multiquantum Wells [J].