Optimizing adsorption of arsenic(III) by NH2-MCM-41 using response surface methodology

被引：35
作者：
Wu, Yunhai [1 ]
Jin, Yanping [2 ]
Cao, Julin [2 ]
Yilihan, Palizhati [2 ]
Wen, Yajun [2 ]
Zhou, Jianxin [2 ]
机构：
[1] Hohai Univ, Key Lab Integrated Regulat & Resources Dev Shallo, Minist Educ, Nanjing 210098, Jiangsu, Peoples R China
[2] Hohai Univ, Coll Environm, Nanjing 210098, Jiangsu, Peoples R China
来源：
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY | 2014年 / 20卷 / 05期
关键词：
NH2-MCM-41; Adsorption; As(III); Response surface methodology; AQUEOUS-SOLUTION; ACTIVATED CARBONS; MIXED-OXIDE; REMOVAL; IRON; OPTIMIZATION; GROUNDWATER; ADSORBENTS; ARSENATE; IONS;
D O I：
10.1016/j.jiec.2013.11.009
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Response surface methodology (RSM) was used to optimize process parameters for arsenic (As(III)) removal from aqueous solution using amine-functionalized MCM-41 (NH2-MCM-41). Four independent variables such as pH, initial metal concentration, temperature and adsorbent dosage were investigated. The optimal conditions to remove As(III) by NH2-MCM-41 was found to be pH 5.62, initial As(III) concentration 5.00 mg/L, temperature 20 degrees C and NH2-MCM-41 dosage 5.00 g/L. XRD, FTIR and SEM analyses testified to the obvious change of the surface morphology and the presence of metal on the sorbent after adsorption. (C) 2013 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码：2792 / 2800
页数：9
相关论文
共 55 条
  • [1] Biosorption of nickel(II) from aqueous solution by Aspergillus niger: Response surface methodology and isotherm study
    Amini, Malihe
    Younesi, Habibollah
    Bahramifar, Nader
    [J]. CHEMOSPHERE, 2009, 75 (11) : 1483 - 1491
  • [2] Synthesis of amino-modified ordered mesoporous silica as a new nano sorbent for the removal of chlorophenols from aqueous media
    Anbia, Mansoor
    Lashgari, Maryam
    [J]. CHEMICAL ENGINEERING JOURNAL, 2009, 150 (2-3) : 555 - 560
  • [3] [Anonymous], 1998, ADSORPTION ANALYSISE
  • [4] Application of Central Composite Design approach for removal of chromium (VI) from aqueous solution using weakly anionic resin: Modeling, optimization, and study of interactive variables
    Bajpai, Shailendra
    Gupta, S. K.
    Dey, Apurba
    Jha, M. K.
    Bajpai, Vidushi
    Joshi, Saurabh
    Gupta, Arvind
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2012, 227 : 436 - 444
  • [5] Arsenic removal through electrocoagulation: Kinetic and statistical modeling
    Balasubramanian, N.
    Kojima, Toshinori
    Srinivasakannan, C.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2009, 155 (1-2) : 76 - 82
  • [6] Arsenic(III) removal performances in the absence/presence of groundwater occurring ions of agglomerated Fe(III)-Al(III) mixed oxide nanoparticles
    Basu, Tina
    Ghosh, Uday Chand
    [J]. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2011, 17 (5-6) : 834 - 844
  • [7] Modeling and optimization of voltage and treatment time for electrocoagulation removal of hexavalent chromium
    Bhatti, Manpreet S.
    Reddy, Akepati S.
    Kalia, Rajeev K.
    Thukral, Ashwani K.
    [J]. DESALINATION, 2011, 269 (1-3) : 157 - 162
  • [8] Removal of arsenic(III) and arsenic(V) from aqueous medium using chitosan-coated biosorbent
    Boddu, Veera M.
    Abburi, Krishnaiah
    Talbott, Jonathan L.
    Smith, Edgar D.
    Haasch, Richard
    [J]. WATER RESEARCH, 2008, 42 (03) : 633 - 642
  • [9] Response surface optimization of the removal of nickel from aqueous solution by cone biomass of Pinus sylvestris
    Can, Mevra Yalvac
    Kaya, Yusuf
    Algur, O. Faruk
    [J]. BIORESOURCE TECHNOLOGY, 2006, 97 (14) : 1761 - 1765
  • [10] Arsenic removal by iron-modified activated carbon
    Chen, Weifang
    Parette, Robert
    Zou, Jiying
    Cannon, Fred S.
    Dempsey, Brian A.
    [J]. WATER RESEARCH, 2007, 41 (09) : 1851 - 1858
123456