Mechanical properties of pure Ni and Ni-alloy substrate materials for Y-Ba-Cu-O coated superconductors

Mechanical properties of rolling-assisted, biaxially-textured substrates (RABiTS) and substrates for ion-beam assisted deposition (IBAD) coated superconductors are measured at room temperature, 76, and 4 K. Yield strength, Young's modulus, and the proportional limit of elasticity are determined, tabulated and compared. Results obtained are intended to serve as a database of mechanical properties of substrates having the same anneal state and texture as those incorporated in the general class of RE-Ba-Cu-O coated conductor composites (RE = rare earth). The RABiTS materials measured are pure Ni, Ni 13at.%Cr, Ni-3at.%W-2at.%Fe, Ni-10at.%Cr-2at.%W, and Ni-5at.%W. The IBAD substrate materials included Inconel 625 and Hastelloy C-276. The Ni alloys are substantially stronger and show higher strains at the proportional limit than those of pure Ni. Substrates fully coated with buffer layers, approximate to 1 mu m of Y-Ba-Cu-O, and 3-5 mu m of Ag have similar mechanical properties (at 76 K) as the substrate alone. Somewhat surprisingly, plating an additional 30-40 mu m of Cu stabilizer onto high-yield-strength (690 MPa) Hastelloy coated conductors similar to 100 mu m thick, reduces the overall yield strength of the composite structure by only about 10-12% at 76 K and 12-14% at room temperature; this indicates that the Cu layer, despite its relatively soft nature, contributes significantly to the overall strength of even high-strength coated conductors. (C) 2006 Elsevier Ltd. All rights reserved.