Study on the capillary performance of micro-post wicks with non-homogeneous configurations

被引:30
作者
Byon, Chan [1 ]
Kim, Sung Jin [2 ]
机构
[1] Yeungnam Univ, Sch Mech Engn, Gyongsan 712749, South Korea
[2] Korea Adv Inst Sci & Technol, Sch Mech Aerosp & Syst Engn, Taejon 305701, South Korea
基金
新加坡国家研究基金会;
关键词
Micro-post wick; Capillary performance; Heat pipe; HEAT-TRANSFER; OPTIMIZATION; EVAPORATOR; PIPE; FLOW;
D O I
10.1016/j.ijheatmasstransfer.2013.09.064
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this study, the capillary performance of the micro-post wicks with non-homogeneous configurations is investigated and compared with a conventional micro-post wick with homogeneous configuration. The experimental and numerical studies show that the capillary performance of the micro-post wick can be significantly enhanced, compared with the homogeneous type wick, by employing non-homogeneous configurations: a groove type wick and a square array type wick have 35% and 31% higher capillary performances, respectively, compared with the homogeneous type wick having equal post size. The capillary performance is shown to be primarily a function of the solid fraction and increases linearly with decreasing solid fraction, regardless of the wick configuration. However, the capillary performance is found to be significantly reduced when the solid fraction falls below a threshold value. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:415 / 421
页数:7
相关论文
共 19 条
[1]  
Brakke K.A., 1998, EXP MATH, V1, P141
[2]   Capillary performance of bi-porous sintered metal wicks [J].
Byon, Chan ;
Kim, Sung Jin .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (15-16) :4096-4103
[3]   The effect of meniscus on the permeability of micro-post arrays [J].
Byon, Chan ;
Kim, Sung Jin .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (11)
[4]   Experimental study of evaporative heat transfer in sintered copper bidispersed wick structures [J].
Cao, XL ;
Cheng, P ;
Zhao, TS .
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2002, 16 (04) :547-552
[5]  
Chi S.W., 1976, HEAT PIPE THEORY PRA
[6]  
d Gennes P.-G., 2004, CAPILLARY WETTING PH
[7]   Analytical and experimental investigations on fluid flow and thermal characteristics of a plate-fin heat sink subject to a uniformly impinging jet [J].
Do, Kyu Hyung ;
Kim, Tae Hoon ;
Kim, Sung Jin .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (9-10) :2318-2323
[8]  
Faghri Amir., 1995, HEAT PIPE SCI TECHNO
[9]   Analytical and experimental investigation on the operational characteristics and the thermal optimization of a miniature heat pipe with a grooved wick structure [J].
Kim, SJ ;
Seo, JK ;
Do, KH .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (11) :2051-2063
[10]   Coupled thermal and hydrodynamic models of flat micro heat pipes for the cooling of multiple electronic components [J].
Lefèvre, F ;
Lallemand, M .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (7-8) :1375-1383