SANDING OF FAGUS SILVATICA L. WOOD PERPENDICULARLY TO THE GRAINS

被引：0

作者：

Porankiewicz, Boleslaw ^{[1
]}

Wieloch, Grzegorz ^{[1
]}

机构：

[1] Acad Agr Poznan, PL-60637 Poznan, Poland

来源：

BIORESOURCES | 2008年 / 3卷 / 03期

关键词：

Disc sanding; Fagus silvatica L; Sanding intensity; Surface burn; Statistical dependencies;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

In this paper the dependencies of the degree of surface burning and intensity during disc sanding perpendicular to the wood grains of Fagus silvatica L. were examined for several machining parameters. Significant impacts of sanding load, thickness, and width of a wooden specimen on the surface burning and disc sanding intensity were evidenced and analyzed by evaluation of multi-factor, non-linear relations. Less important influences of cutting speed and size of grit on the surface burning and the sanding intensity, as well as single sanding cycle time and total sanding operating time on the surface burning were observed.

引用

页码：684 / 700

页数：17

共 50 条

[1] STUDIES ON A GALACTAN FROM TENSION WOOD OF BEECH (FAGUS-SILVATICA L.)
MEIER, H
ACTA CHEMICA SCANDINAVICA, 1962, 16 (09): : 2275 - &
[2] Die Biegefestigkeit von Keilzinkenverbindungen aus Brettern der Buche (Fagus silvatica L.) The bending strength of finger joints manufactured from beech wood (Fagus silvatica L.)
M. Frese
H. J. Blaß
Holz als Roh- und Werkstoff, 2006, 64 (6) : 433 - 443
[3] The bending strength of finger joints manufactured from beech wood (Fagus silvatica L.)
Frese, M.
Blass, H. J.
HOLZ ALS ROH-UND WERKSTOFF, 2006, 64 (06) : 433 - 443
[4] Machining qualification of solid wood of Fagus silvatica L. and Piceaexcelsa L.: cutting forces, power requirements and surface roughness
Alfredo Aguilera
P. Martin
Holz als Roh- und Werkstoff, 2001, 59 : 483 - 488
[5] Surface Roughness of Heat Treated and Untreated Beech (Fagus sylvatica L.) Wood after Sanding
Gurau, Lidia
Irle, Mark
Buchner, Julia
BIORESOURCES, 2019, 14 (02): : 4512 - 4531
[6] Gluability of thermally modified beech (Fagus silvatica L.) and birch (Betula pubescens Ehrh.) wood
Boruszewski, P. J.
Borysiuk, P.
Maminski, M. L.
Grzeskiewicz, M.
WOOD MATERIAL SCIENCE & ENGINEERING, 2011, 6 (04) : 185 - 189
[7] Radial variation of pH and buffer capacity in the red-heartwooded beech (Fagus silvatica L.) wood
Albert, L
Németh, ZI
Halász, G
Koloszár, J
Varga, S
Takács, L
HOLZ ALS ROH-UND WERKSTOFF, 1999, 57 (01) : 75 - 76
[8] Technical strength of beech wood (Fagus silvatica)
Szalai, J
DREVARSKY VYSKUM, 1997, 42 (03): : 1 - 13
[9] Radial variation of pH and buffer capacity in the red-heartwooded beech (Fagus silvatica L.) wood
L. Albert
Zs. I. Németh
G. Halász
J. Koloszár
Sz. Varga
L. Takács
Holz als Roh- und Werkstoff, 1999, 57 : 75 - 76
[10] Machining qualification of solid wood of Fagus silvatica L. and Picea excelsa L.:: Cutting forces, power requirements and surface roughness
Aguilera, A
Martin, P
HOLZ ALS ROH-UND WERKSTOFF, 2001, 59 (06) : 483 - 488

← 1 2 3 4 5 →