Optimization of fabric drape measurement based on 3D model

被引：5

作者：

Hussain, Azmat ^{[1
,3
]}

Naveed, Tayyab ^{[1
,5
]}

Iqbal, Danish ^{[4
]}

Yu, Zhicai ^{[1
]}

Xin, Wang ^{[1
]}

Waqar, Iqbal ^{[6
]}

Zhong, Yueqi ^{[1
,2
]}

机构：

[1] Donghua Univ, Coll Text, Shanghai 201620, Peoples R China

[2] Donghua Univ, Coll Text, Minist Educ, Key Lab Text Sci & Technol, Shanghai 201620, Peoples R China

[3] Bahauddine Zakariya Univ, Coll Text Engn, Multan 54000, Pakistan

[4] Cent Cotton Res Inst, Sect Fiber Technol, Multan, Pakistan

[5] Univ Punjab, Dept Text Engn & Technol, Lahore, Pakistan

[6] Tianjin Polytech Univ, Sch Text, Tianjin, Peoples R China

来源：

INDUSTRIA TEXTILA | 2019年 / 70卷 / 04期

基金：

中国国家自然科学基金;

关键词：

bending stiffness; drape projection; modified drape coefficient; slice function; three dimensional drape; RECONSTRUCTION;

D O I：

10.35530/IT.070.04.1552

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

Drapability is an important characteristic of fabric appearance, mainly correlates to its stiffness. It is evaluated objectively with a dominant indicator, drape coefficient (DC). Drape coefficient is based on the two-dimensional projection-area of three-dimensional (3D) draped sample. In this study, three dimensional (3D) drape-model is evaluated and a new basis of the area is revealed with slice function. The proposed area was calculated using a horizontal plane that cut the 3D drape-model (slice curve) just above the highest point of actual boundary-curve. Modified drape coefficient (MDC) was compared with DC against bending stiffness. The results demonstrate that the bending stiffness has better conformance with MDC than that of DC. This implies that MDC is more effective in evaluating fabric drapability.

引用

页码：318 / 323

页数：6

共 26 条

[1]

Agrawal S., 2013, INT J ENG RES APPL, V3

[2]

[Anonymous], 2008, D138808 ASTM

[3]

Behera B.K., 2003, TEXTILE ASIA, V34, P45

[4]

Carrera-Gallissa E., 2016, J TEXT I, V103, P325