EXPERIMENTAL STUDIES ON THE INFLUENCE OF CUTTING PARAMETERS ON DELAMINATION AT CFRP DRILLING USING TAGUCHI METHOD

被引：0

作者：

Jugrestan, Claudiu Ioan ^{[1
]}

Popa, Marcel Sabin ^{[1
]}

Sattel, Stefan ^{[2
]}

Veres, Ovidiu Virgil ^{[1
]}

Contiu, Glad ^{[1
]}

机构：

[1] Tech Univ Cluj Napoca, B Dul Muncii 103-105, Cluj Napoca, Romania

[2] Guhring KG, Herderstr 50-54, Cluj Albstadt, Germany

来源：

ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING | 2019年 / 62卷 / 03期

关键词：

drilling; CFRP; Taguchi Method; ANOVA; delamination; cutting parameters;

D O I：

暂无

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Drilling carbon fiber reinforced plastics (CFRP) is the most common machining operation during the assembly process in the aerospace and automotive industries. Due to the inhomogeneity of the CFRP, different kind of errors occurs comparing the drilling of traditional materials, the biggest problem being the delamination. The aim of this paper is to investigate the influence of the feed rate and spindle speed on delamination resulted while drilling CFRP materials. A plan of experiments based on Taguchi Method was made considering a combination of three different values for feed rate and three different values for spindle speed. Analysis of variance (ANOVA) was used to analyze the experiments results and to determine the optimal cutting parameters.

引用

页码：497 / 502

页数：6

共 12 条

[1] Albuquerque V.H.C., 2008, ENGOPT 2008
[2] Ayparcasi Z, 2014, P 4 INT C APMAS2014
[3] Campos CJA, 2007, ZOOTAXA, P1
[4] Drilling Damage in Composite Material
Durao, Luis Miguel P.
Tavares, Joao Manuel R. S.
de Albuquerque, Victor Hugo C.
Marques, Jorge Filipe S.
Andrade, Oscar N. G.
[J]. MATERIALS, 2014, 7 (05): : 3802 - 3819
[5] Hinze W, 2012, VDI Z, V154
[6] Comprehensive analysis of delamination in drilling of composite materials with various drill bits
Hocheng, H
Tsao, CC
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 335 - 339
[7] IANCAU H, 2003, MAT COMPOZITE CONCEP
[8] Experimental investigation of the hole accuracy, delamination, and cutting force in piercing of carbon fiber reinforced plastics
Klocke, Fritz
Shirobokov, Anton
Kerchnawe, Sophie
Wahl, Martin
Mannens, Robby
Feuerhack, Andreas
Mattfeld, Patrick
[J]. 1ST CIRP CONFERENCE ON COMPOSITE MATERIALS PARTS MANUFACTURING (CIRP CCMPM 2017), 2017, 66 : 215 - 220
[9] Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill
Marques, Antonio T.
Durao, Luis M.
Magalhaes, Antonio G.
Silva, Joao Francisco
Tavares, Joao Manuel R. S.
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (14) : 2376 - 2382
[10] Muller-Hummel P, 2011, BOHREN CFK TITAN STA

← 1 2 →