Effects of SiC, Al2O3, and ZrO2 particles on the LBMed characteristics of Al/SiC, Al/Al2O3, and Al/ZrO2 MMCs prepared by stir casting process

被引：16
作者：
Kumar, Vinod [1 ]
Sharma, Vikas [2 ]
机构：
[1] Thapar Univ, Mech Engn Dept, Patiala, Punjab, India
[2] NorthCap Univ, Mech Engn Dept, Gurugram, India
来源：
PARTICULATE SCIENCE AND TECHNOLOGY | 2019年 / 37卷 / 06期
关键词：
Agglomeration; energy-dispersive X-ray spectroscopy; heterogeneous particles; porosity; reinforcement; METAL-MATRIX COMPOSITES; DRY SLIDING WEAR; MECHANICAL-PROPERTIES; ALLOY; BEHAVIOR; SPEED; SHEET;
D O I：
10.1080/02726351.2018.1445152
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The effects of SiC, Al2O3, and ZrO2 particles on the characteristics of Al/SiC, Al/Al2O3, and Al/ZrO2 metal matrix composites (MMCs) have been studied in the present research work. The comparison of machining characteristics has been done to analyze the behavior of various reinforced particles with the variation of laser machining variables. The output characteristics such as dross height and kerf deviation have been investigated and compared with each MMCs. SEM and XRD have been used for the investigation of morphological changes in the structure and agglomeration of reinforced particles. The crack and recast layer formation has been examined in the specimens of higher quantity of reinforced particles. It was observed that the MMC material reinforced with SiC particles has shown different behavior as compared to other MMC materials.
引用
收藏
页码：766 / 776
页数：11
相关论文
共 30 条
[1]   Enhanced mechanical properties of in situ aluminium matrix composites reinforced by alumina nanoparticles [J].
Afkham, Yalda ;
Khosroshahi, Rasoul Azari ;
Rahimpour, Sajed ;
Aavani, Cassra ;
Brabazon, Dermot ;
Mousavian, Reza Taherzadeh .
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2018, 18 (01) :215-226
[2]  
Arata Y., 1981, Trans. JWR1, V10, P129
[3]   Performance Study on Fatigue Behaviour in Aluminium Alloy and Alumina Silicate Particulate Composites [J].
Arivukkarasan, S. ;
Dhanalakshmi, V. ;
Babu, A. Suresh ;
Aruna, M. .
JOURNAL OF APPLIED SCIENCE AND ENGINEERING, 2013, 16 (02) :127-134
[4]   Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites [J].
Balasubramanian, I. ;
Maheswaran, R. .
MATERIALS & DESIGN, 2015, 65 :511-520
[5]  
Bhandare R.G., 2013, INT J ENG ADV TECHNO, V3, P2249
[6]   Particle distribution in cast metal matrix composites - Part I [J].
Hashim, J ;
Looney, L ;
Hashmi, MSJ .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 123 (02) :251-257
[7]   Metal matrix composites: production by the stir casting method [J].
Hashim, J ;
Looney, L ;
Hashmi, MSJ .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 93 :1-7
[8]   On the impact toughness of Al-15 vol.% B4C metal matrix composites [J].
Ibrahim, M. F. ;
Ammar, H. R. ;
Samuel, A. M. ;
Soliman, M. S. ;
Samuel, F. H. .
COMPOSITES PART B-ENGINEERING, 2015, 79 :83-94
[9]   Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process [J].
Jacob, S. ;
Shajin, S. ;
Gnanavel, C. .
INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH, 2017, 183
[10]  
Kandpal BC, 2017, MATER TODAY-PROC, V4, P2783, DOI 10.1016/j.matpr.2017.02.157
123