Remanufacturing of Woven Carbon Fibre Fabric Production Waste into High Performance Aligned Discontinuous Fibre Composites

被引：19

作者：

Aravindan, Parthasarathi ^{[1
]}

Becagli, Federico ^{[2
]}

Longana, Marco L. ^{[1
]}

Blok, Lourens G. ^{[1
]}

Pozegic, Thomas R. ^{[1
]}

Huntley, Samantha J. ^{[1
]}

Rendall, Thomas ^{[1
]}

Hamerton, Ian ^{[1
]}

机构：

[1] Univ Bristol, Bristol Composites Inst ACCIS, Dept Aerosp Engn, Sch Civil Aerosp & Mech Engn, Queens Bldg, Bristol BS8 1TR, Avon, England

[2] Microtex Composites SRL, Via Toscana 59, I-59100 Prato, Italy

来源：

JOURNAL OF COMPOSITES SCIENCE | 2020年 / 4卷 / 02期

基金：

英国工程与自然科学研究理事会;

关键词：

recycling; aligned discontinuous fibre composites; waste management; sustainability; REINFORCED POLYMERS; RECOVERY; TECHNOLOGIES; ROUTE; REUSE;

D O I：

10.3390/jcs4020068

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

The composites industry generates considerable volumes of waste in a wide variety of forms, from the production of by-products to end-of-life parts. This paper focuses on the remanufacturing of dry fibre off-cuts, produced during the composite fabric weaving process, into highly aligned discontinuous fibre prepreg tapes with High Performance Discontinuous Fibre (HiPerDiF) technology. Unidirectional laminate specimens are prepared using various combinations of fibre lengths and tested in tension, obtaining a stiffness of 80 GPa, a strength of 800 MPa, and a failure strain of 1%. Several applications are envisaged for the produced tape: adhesive film, feedstock for filament winding, and tow for weaved fabrics. This work demonstrates the possibility to extract value from what is currently considered manufacturing waste.

引用

页数：9

共 43 条

[1] [Anonymous], 2000, STANDARD TEST METHOD
[2] Chemical recycling of carbon fibers reinforced epoxy resin composites in oxygen in supercritical water
Bai, Yongping
Wang, Zhi
Feng, Liqun
[J]. MATERIALS & DESIGN, 2010, 31 (02) : 999 - 1002
[3] Baz S., 2018, P 18 EUR C COMP MAT
[4] An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid
Das, Mohan
Chacko, Rinu
Varughese, Susy
[J]. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2018, 6 (02): : 1564 - 1571
[5] An overview of the technology of fibre-reinforced plastics for design purposes
Edwards, KL
[J]. MATERIALS & DESIGN, 1998, 19 (1-2): : 1 - 10
[6] Recyclability and reutilization of carbon fiber fabric/epoxy composites
Feraboli, Paolo
Kawakami, Hirohide
Wade, Bonnie
Gasco, Federico
Deoto, Luciano
Masini, Attilio
[J]. JOURNAL OF COMPOSITE MATERIALS, 2012, 46 (12) : 1459 - 1473
[7] Heider D., 2019, P SAMPE 2019 MUN GER
[8] Heider D., 2019, P SAMPE CHARL NC US
[9] Development of a new hybrid yarn construction from recycled carbon fibers (rCF) for high-performance composites. Part-II: Influence of yarn parameters on tensile properties of composites
Hengstermann, M.
Hasan, M. M. B.
Abdkader, A.
Cherif, Ch
[J]. TEXTILE RESEARCH JOURNAL, 2017, 87 (13) : 1655 - 1664
[10] Development of new hybrid yarn construction from recycled carbon fibers for high performance composites. Part-I: basic processing of hybrid carbon fiber/polyamide 6 yarn spinning from virgin carbon fiber staple fibers
Hengstermann, M.
Raithel, N.
Abdkader, A.
Hasan, M. M. B.
Cherif, Ch
[J]. TEXTILE RESEARCH JOURNAL, 2016, 86 (12) : 1307 - 1317

← 1 2 3 4 5 →