An Experimental Device for Studying the 3D Cryoprinting Processes

被引：5
|
作者：
Mironov, A., V [1 ]
Algebraistova, P. Yu [2 ]
Komlev, V. S. [1 ,3 ]
Mironova, O. A. [1 ]
Popov, V. K. [1 ]
机构：
[1] Russian Acad Sci, Crystallog & Photon Fed Res Ctr, Inst Photon Technol, Moscow 108840, Russia
[2] Moscow MV Lomonosov State Univ, Moscow 119991, Russia
[3] Russian Acad Sci, Baikov Inst Met & Mat Sci, Moscow 119334, Russia
来源：
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES | 2020年 / 63卷 / 06期
基金：
俄罗斯基础研究基金会;
关键词：
11;
D O I：
10.1134/S0020441220050310
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A device has been developed to study the physicochemical processes of the formation of a structure that occurs during temperature-induced aggregate transitions of liquid and gel compositions during three-dimensional printing under conditions of significant temperature gradients. The device is based on a three-dimensional coordinate system with a heated pneumatic dispenser of viscous fluid compositions and a substrate cooled to -190 degrees C. Liquid nitrogen, solid carbon dioxide, or an integrated Peltier cooling system are used to cool the substrate. The device is equipped for contact temperature control and has a digital video camera.
引用
收藏
页码：890 / 892
页数：3
相关论文
共 50 条
  • [1] An Experimental Device for Studying the 3D Cryoprinting Processes
    A. V. Mironov
    P. Yu. Algebraistova
    V. S. Komlev
    O. A. Mironova
    V. K. Popov
    Instruments and Experimental Techniques, 2020, 63 : 890 - 892
  • [2] Cryopreservation of 3D Bioprinted Scaffolds with Temperature-Controlled-Cryoprinting
    Warburton, Linnea
    Rubinsky, Boris
    GELS, 2023, 9 (06)
  • [3] 3D visualization processes for recreating and studying organismal form
    Irschick, Duncan J.
    Christiansen, Fredrik
    Hammerschlag, Neil
    Martin, Johnson
    Madsen, Peter T.
    Wyneken, Jeanette
    Brooks, Annabelle
    Gleiss, Adrian
    Fossette, Sabrina
    Siler, Cameron
    Gamble, Tony
    Fish, Frank
    Siebert, Ursula
    Patel, Jaymin
    Xu, Zhan
    Kalogerakis, Evangelos
    Medina, Joshua
    Mukherji, Atreyi
    Lauder, George
    Mandica, Mark
    Zotos, Savvas
    Detwiler, Jared
    Perot, Blair
    ISCIENCE, 2022, 25 (09)
  • [4] Studying in 3D Environments
    Marcelino, R.
    Silva, J. B.
    Gruber, V.
    Bilessimo, S. M.
    Oliveira, J.
    Santana, S. B.
    Mello, I.
    INTERNATIONAL JOURNAL OF ONLINE ENGINEERING, 2014, 10 (03) : 11 - 17
  • [5] Temperature-Controlled 3D Cryoprinting Inks Made of Mixtures of Alginate and Agar
    Lou, Leo
    Rubinsky, Boris
    GELS, 2023, 9 (09)
  • [6] Experimental Device for Reconstructing Spinal Deviations in to a 3D Model
    Horvat, F.
    Cekan, M.
    Soltes, L.
    Hucko, B.
    MECHATRONICS 2013: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES, 2014, : 779 - 784
  • [7] 3D SHPB device experimental design and principle research
    Huang, Yong-Hui, 1600, Beijing Institute of Technology (34):
  • [8] 3D Scaner (3D input device)
    Sato, Koki
    Journal of the Institute of Image Electronics Engineers of Japan, 2015, 44 (02) : 282 - 284
  • [9] Studying 3D collisions with smartphones
    Pereira, Vanda
    Martin-Ramos, Pablo
    da Silva, Pedro Pereira
    Silva, Manuela Ramos
    PHYSICS TEACHER, 2017, 55 (05): : 312 - 313
  • [10] Studying spawning behavior in 3D
    不详
    FISHERIES, 2007, 32 (06) : 265 - 265
12345