Common-Mode Noise Reduction Using Asymmetric Coupled Line With SMD Capacitor

被引:23
|
作者
Huang, Bao-Ren [1 ]
Chang, Chia-Han [1 ]
Fang, Ruei-Ying [1 ]
Wang, Chun-Long [1 ]
机构
[1] Natl Taiwan Univ Sci & Technol, Taipei 106, Taiwan
关键词
Asymmetric coupled line (ACL); common-mode noise; surface mount device (SMD) capacitor; BEND DISCONTINUITIES; SUPPRESSION FILTER;
D O I
10.1109/TCPMT.2014.2315252
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, a bended differential transmission line using the asymmetric coupled line (ACL) with surface mount device (SMD) capacitor is proposed to suppress the common-mode noise. The bended differential transmission line using the ACL with SMD capacitor can greatly reduce the mode conversion from -6.91 to -13.29 dB and the Time-Domain-Through common-mode noise from 0.063 to 0.023 V as compared with the bended differential transmission line using the right-angle bend. Also, the differential-mode transmission is increased and the small differential-mode reflection is maintained. To verify the simulation results, measurement is done in the frequency and time domains where the measurement results are in good agreement with the simulation results.
引用
收藏
页码:1082 / 1089
页数:8
相关论文
共 50 条
  • [1] Common-mode Noise Reduction on Broadside-coupled Delay Line
    Lin, Ding-Bing
    Huang, Chung-Pin
    Ke, Hsin-Nan
    Liu, Wen-Sheng
    2015 IEEE SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND SIGNAL INTEGRITY, 2015, : 144 - 147
  • [2] Common-Mode Noise Reduction of Bended Coupled Lines by Using Time Compensation Technology
    Lin, Ding-Bing
    Huang, Chung-Pin
    Lin, Chih-Hao
    Ke, Hsin-Nan
    Liu, Wen-Sheng
    2016 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2016, : 797 - 800
  • [3] Common-Mode Noise Reduction of Bended Differential Lines using Meander Line structure
    Lim, Jaehyuk
    Lee, Seungjin
    Lee, Jaehoon
    Kim, Yonghoon
    Oh, Dan
    2018 JOINT IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND 2018 IEEE ASIA-PACIFIC SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC/APEMC), 2018, : 442 - 445
  • [4] Asymmetric coupled lines for common-mode noise suppression in bent differential lines
    Lim, J.
    Lee, S.
    Oh, S.
    Jeong, J.
    Lee, J.
    ELECTRONICS LETTERS, 2019, 55 (03) : 135 - 136
  • [5] Bended Differential Transmission Line Using Short-Circuited Coupled Line for Common-Mode Noise Suppression
    Chang, Chia-Han
    Fang, Ruei-Ying
    Wang, Chun-Long
    2011 IEEE 20TH CONFERENCE ON ELECTRICAL PERFORMANCE OF ELECTRONIC PACKAGING AND SYSTEMS (EPEPS), 2011, : 291 - 294
  • [6] Mode Conversion and Common-Mode Noise Reduction Using Periodic Structure Filter
    Cai, Jyun-Dian
    Chen, Kuan-Chung
    Wang, Chun-Long
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2022, 64 (04) : 1021 - 1030
  • [7] Using Stepped-Impedance Lines for Common-Mode Noise Reduction on Bended Coupled Transmission Lines
    Lin, Ding-Bing
    Huang, Chung-Pin
    Ke, Hsin-Nan
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2016, 6 (05): : 757 - 766
  • [8] Novel balanced coupled-line bandpass filters with common-mode noise suppression
    Wu, Chung-Hwa
    Wang, Chi-Hsueh
    Chen, Chun Hsiung
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2007, 55 (02) : 287 - 295
  • [9] Smooth Bend Structures Using Hybrid Compensation for Common-Mode Noise Reduction
    Lin, Ding-Bing
    Wang, Mei-Hui
    Huang, Yong-Lun
    APPLIED SCIENCES-BASEL, 2022, 12 (13):
  • [10] Common-Mode Noise Reduction Schemes for Weakly Coupled Differential Serpentine Delay Microstrip Lines
    Shiue, Guang-Hwa
    Kao, Yu-Han
    Hsu, Che-Ming
    Tsai, Yi-Chin
    Vande Ginste, Dries
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2013, 3 (06): : 1016 - 1027